Today's run sucked.
Or at least it felt like it did.
Occasionally I have these running "sessions" where it feels like I'm running through Molasses while running on sand against the wind.
I did not time this run, but I doubt it was anything more than two minutes off my usual time.
Nov 10, 2011
Nov 7, 2011
Quiet Running
The past three days, I was without my headphones. I left them at work on Friday and didn't feel like turning around and getting them after I realized this halfway home. I didn't think too much of it, until I got up to go running Saturday morning.
I always run with my headphones. I'm either listening to a podcast about technology, listening to an audiobook, or just plain old Music.
The three days without my headphones was an experience.
The first thing I noticed was my breathing: I could hear it and focused on it. I was trying to not take short, shallow breaths. I had to try NOT to focus...I thought the noises from Nature would help distract...
...but it was eerily quiet. Besides the occasional car, there were essentially no other noises. Nothing.
I do know where all the dogs live now :)
I always run with my headphones. I'm either listening to a podcast about technology, listening to an audiobook, or just plain old Music.
The three days without my headphones was an experience.
The first thing I noticed was my breathing: I could hear it and focused on it. I was trying to not take short, shallow breaths. I had to try NOT to focus...I thought the noises from Nature would help distract...
...but it was eerily quiet. Besides the occasional car, there were essentially no other noises. Nothing.
I do know where all the dogs live now :)
Nov 6, 2011
"I'm sorry my dog bit you, here's a coffee cake.."
"Did you bake a cake?" Robyn asked, as she walked in the door.
I paused the Beauty and the Beast Soundtrack on Pandora.
"What?" I asked, slightly puzzled.
"There's a cake in the garage. Did you bake it and put it there?"
I walked over to the door.
"No." I said "I was planning on making an apple cake/crisp.."
I looked out our door and saw an aluminum foil-wrapped plate on top of my tool box.
"Uh, if you didn't, then who did. Did my mom drop it off maybe?" Robyn asked, trying to piece together the cake mystery.
I picked up the still warm plate and peaked under the foil. It smelled of melted butter, cinnamon, and nutmeg: An almost picture perfect classic coffee cake.
"Oh.." I said, with a slight sigh. "I bet this is from across the street. A way to say 'Sorry my dog bit you, have a coffee cake.'"
A couple of hours earlier, I had gone out to check the mailbox. On my way to the mailbox, one of the three dogs that lives across the street started running toward me. I looked up, waved and said hi to the dog, and proceeded to grab my mail.
The dog continued to come closer, making its way to the middle of the road.
"Well, that's not a good place to hang out." I said calmly to the dog.
The dog had laid down on the yellow line in the middle of the road, in what appeared to be a quasi-friendly way. One of the dog's owners came out and started calling for the dog.
"I'm sorry about that! The batteries are dead in the collar and the thing has been unplugged for a while" she said, motioning to the little outbuilding where the electric fence base station is.
"Oh no problem!" I said cheerfully. "I"m trying to convince her the road isn't a good place to lay down."
I put my hands down at my side, the two junk letters in my left hand. I put my palms towards the dog, in trying to show her I was unarmed or something. I made a little "come on" motion with my left hand as I slowly walked towards the dog in trying to coax it out of the road.
That's when the dog's demeanor changed. The dog hunched back a bit, and lowered its ears. I stopped moving forward and took one step back. At this point I was within striking distance. The dog made one quick bark and lunged at my left arm. I my arm back, and the dog bit my left leg above the knee and just before the hamstring.
"GRah!" I spurted out. It surprised me more than anything else. I was wearing my Carhart pants, which are fairly thick.
"Oh my goodness" my neighbor said in shock. "I'm so sorry!"
"It's alright, I don't think there was any permanent damage, just a startle." I said, in trying to calm her down.
At this point the dog had sneaked its way back to its own yard. My neighbor kept repeating how sorry she was and how she shouldn't have done that.
"It's alright, I don't think she even got me. No harm, no foul." I said with a slight laugh.
I went back inside and relayed the story to Robyn. She was more concerned than I was, but she was thinking more about dogs and Kids.
"What if it gets loose while the kids are riding bikes in the driveway?" Robyn asked.
"I don't know." I replied, trying to find the best answer. "Have a taser handy?"
"All I know is this: Electric fences are terrible." I stated.
"Yeah, and we have TWO of them surrounding us." Robyn said. "Alright, I'm off to JoAnn's."
"Alright. Have fun. Love you!" I said as she was walking to the door.
"Love you too. See you later." She said.
I took a look at the bite: It barely broke the skin. It looked more like a small spot of rug burn. I put some beta dine, and Neosporin on the area, put a bandaid on and went about my day.
I paused the Beauty and the Beast Soundtrack on Pandora.
"What?" I asked, slightly puzzled.
"There's a cake in the garage. Did you bake it and put it there?"
I walked over to the door.
"No." I said "I was planning on making an apple cake/crisp.."
I looked out our door and saw an aluminum foil-wrapped plate on top of my tool box.
"Uh, if you didn't, then who did. Did my mom drop it off maybe?" Robyn asked, trying to piece together the cake mystery.
I picked up the still warm plate and peaked under the foil. It smelled of melted butter, cinnamon, and nutmeg: An almost picture perfect classic coffee cake.
"Oh.." I said, with a slight sigh. "I bet this is from across the street. A way to say 'Sorry my dog bit you, have a coffee cake.'"
A couple of hours earlier, I had gone out to check the mailbox. On my way to the mailbox, one of the three dogs that lives across the street started running toward me. I looked up, waved and said hi to the dog, and proceeded to grab my mail.
The dog continued to come closer, making its way to the middle of the road.
"Well, that's not a good place to hang out." I said calmly to the dog.
The dog had laid down on the yellow line in the middle of the road, in what appeared to be a quasi-friendly way. One of the dog's owners came out and started calling for the dog.
"I'm sorry about that! The batteries are dead in the collar and the thing has been unplugged for a while" she said, motioning to the little outbuilding where the electric fence base station is.
"Oh no problem!" I said cheerfully. "I"m trying to convince her the road isn't a good place to lay down."
I put my hands down at my side, the two junk letters in my left hand. I put my palms towards the dog, in trying to show her I was unarmed or something. I made a little "come on" motion with my left hand as I slowly walked towards the dog in trying to coax it out of the road.
That's when the dog's demeanor changed. The dog hunched back a bit, and lowered its ears. I stopped moving forward and took one step back. At this point I was within striking distance. The dog made one quick bark and lunged at my left arm. I my arm back, and the dog bit my left leg above the knee and just before the hamstring.
"GRah!" I spurted out. It surprised me more than anything else. I was wearing my Carhart pants, which are fairly thick.
"Oh my goodness" my neighbor said in shock. "I'm so sorry!"
"It's alright, I don't think there was any permanent damage, just a startle." I said, in trying to calm her down.
At this point the dog had sneaked its way back to its own yard. My neighbor kept repeating how sorry she was and how she shouldn't have done that.
"It's alright, I don't think she even got me. No harm, no foul." I said with a slight laugh.
I went back inside and relayed the story to Robyn. She was more concerned than I was, but she was thinking more about dogs and Kids.
"What if it gets loose while the kids are riding bikes in the driveway?" Robyn asked.
"I don't know." I replied, trying to find the best answer. "Have a taser handy?"
"All I know is this: Electric fences are terrible." I stated.
"Yeah, and we have TWO of them surrounding us." Robyn said. "Alright, I'm off to JoAnn's."
"Alright. Have fun. Love you!" I said as she was walking to the door.
"Love you too. See you later." She said.
I took a look at the bite: It barely broke the skin. It looked more like a small spot of rug burn. I put some beta dine, and Neosporin on the area, put a bandaid on and went about my day.
Nov 5, 2011
Contacts Free
A few months back, I was on my last pair of contacts.
Seeing as it had been over three years since I got my one-year supply, I decided to call an optometrist and get my eyes checked out.
One of the benefits working at a Medical Center is that if you are looking for any kind of doctor, they are most likely there. It makes getting to appointments easy: no need to worry about finding a place to park, just walk down!
I met with the nice Doctor and she did her eye Doctor thing. Twenty minutes later, she told me my earlier prescription was too strong, and was probably too strong when I got it. She recommended I get new glasses after seeing the battle worn glasses I brought in.
I asked her about contacts. She'd be more than happy to fit me for contacts; all it required was a fitting fee and more money.
The practical (read: cheap) side of me starting butting in the internal monologue I was having. If I had to get new glasses anyway, why get contacts as well? If I decided that glasses weren't the thing for me on a daily basis, I could easily just stop down for another appointment and pay the fee.
Practicality usurped control and I just ordered glasses. It was hard to decided on a pair that I liked. I knew I didn't want too thick framed or too large of a lens: I had flashbacks to my seventh grade picture with the glasses that ran halfway down my cheeks. I also didn't want to pay a crapton for frames.
Side note: just like cars and houses, after looking a 30 or 40 pairs of glasses, they all look the same. It helps to take notes and go back after a day or so to compare.
I finally decided on a frame and began the purchasing process. Without any discounts, the glasses should have cost $460!
Thankfully, insurance kicked in $60 (sarcasm), I got an employee discount, and got a "game card" that got me an extra 15% off.
When it was all said and done, it ended up around $250...not bad. Not great, but when you factor in time off from work increase, the employee discount and gas to drive, I don't know if I could have done much better.
So far, I'm liking just doing the glasses. I do have to clean my lenses so I can see periodically, but I like it. The only time I don't like wearing glasses is running, as they have a tendency to fog up and bounce a bit. I suppose I could get a glasses strap to help keep the in place...
I could also get a pocket protector while I'm at it too...
Seeing as it had been over three years since I got my one-year supply, I decided to call an optometrist and get my eyes checked out.
One of the benefits working at a Medical Center is that if you are looking for any kind of doctor, they are most likely there. It makes getting to appointments easy: no need to worry about finding a place to park, just walk down!
I met with the nice Doctor and she did her eye Doctor thing. Twenty minutes later, she told me my earlier prescription was too strong, and was probably too strong when I got it. She recommended I get new glasses after seeing the battle worn glasses I brought in.
I asked her about contacts. She'd be more than happy to fit me for contacts; all it required was a fitting fee and more money.
The practical (read: cheap) side of me starting butting in the internal monologue I was having. If I had to get new glasses anyway, why get contacts as well? If I decided that glasses weren't the thing for me on a daily basis, I could easily just stop down for another appointment and pay the fee.
Practicality usurped control and I just ordered glasses. It was hard to decided on a pair that I liked. I knew I didn't want too thick framed or too large of a lens: I had flashbacks to my seventh grade picture with the glasses that ran halfway down my cheeks. I also didn't want to pay a crapton for frames.
Side note: just like cars and houses, after looking a 30 or 40 pairs of glasses, they all look the same. It helps to take notes and go back after a day or so to compare.
I finally decided on a frame and began the purchasing process. Without any discounts, the glasses should have cost $460!
Thankfully, insurance kicked in $60 (sarcasm), I got an employee discount, and got a "game card" that got me an extra 15% off.
When it was all said and done, it ended up around $250...not bad. Not great, but when you factor in time off from work increase, the employee discount and gas to drive, I don't know if I could have done much better.
So far, I'm liking just doing the glasses. I do have to clean my lenses so I can see periodically, but I like it. The only time I don't like wearing glasses is running, as they have a tendency to fog up and bounce a bit. I suppose I could get a glasses strap to help keep the in place...
I could also get a pocket protector while I'm at it too...
Oh Spam Comments
According to my Spam comments, my About page has helped hundreds of people, with professional advice, witty comments, and served as a meeting of the minds.
Oh, and a great place to comment on here to find the cheapest drugs and the oddest Adult oriented sites...
I should probably clean out the spam more often...
Oh, and a great place to comment on here to find the cheapest drugs and the oddest Adult oriented sites...
I should probably clean out the spam more often...
Nov 4, 2011
Should be an interesting Weekend
I left my laptop and iPad at work today.
This will make for a quiet weekend. Probably not a bad thing, I have a Quasi-Thanksgiving to plan!
Woke up this morning to no power in the house. Didn't realize it at first, and fell back asleep.
Woke up again...to a blinking alarm clock. By the time I got the stove back up and running and the animals fed, there was no way I had time to go running.
Looks like it'll be a weekend of running for me!
This will make for a quiet weekend. Probably not a bad thing, I have a Quasi-Thanksgiving to plan!
Woke up this morning to no power in the house. Didn't realize it at first, and fell back asleep.
Woke up again...to a blinking alarm clock. By the time I got the stove back up and running and the animals fed, there was no way I had time to go running.
Looks like it'll be a weekend of running for me!
Stove is running fine
I think I have the stove running pretty good now.
After resealing every joint in the exhaust and the door, I think it is finally airtight. I'm not happy with the amount of silicone in the door gasket, but as long as it works for now, I'll take it.
I fired up the stove after the sealing and the draft fan sensor turned off, which means the loss in pressure was gone! I still had an issue with the pellets just piling up in the burn pot. After about 12 hours, the pot would be over flowing, and the bottom would be covered in "clinkers" or fused ash. This clogs the air holes which causes the flame to be lazy, as well as not allow ash to be trapped in the ash trap.
So, I also modified the draft fan thresholds a bit. The Factory setting is 100 for low, and 300 for high. I wish I knew what the units were, cfm maybe?
Anyway, after adjusting it to 170/315, the flame seems to be more stable, and the pellets are not piling up in the burn pot like they were on the default settings. If anything, I might need to turn it down just a bit; I think the flame may be too active. Although, my ash is nice and chocolate in color, a good sign the stove is running fairly efficient.
I'm sure that this will be an ongoing thing, but for now...I have heat :)
After resealing every joint in the exhaust and the door, I think it is finally airtight. I'm not happy with the amount of silicone in the door gasket, but as long as it works for now, I'll take it.
I fired up the stove after the sealing and the draft fan sensor turned off, which means the loss in pressure was gone! I still had an issue with the pellets just piling up in the burn pot. After about 12 hours, the pot would be over flowing, and the bottom would be covered in "clinkers" or fused ash. This clogs the air holes which causes the flame to be lazy, as well as not allow ash to be trapped in the ash trap.
So, I also modified the draft fan thresholds a bit. The Factory setting is 100 for low, and 300 for high. I wish I knew what the units were, cfm maybe?
Anyway, after adjusting it to 170/315, the flame seems to be more stable, and the pellets are not piling up in the burn pot like they were on the default settings. If anything, I might need to turn it down just a bit; I think the flame may be too active. Although, my ash is nice and chocolate in color, a good sign the stove is running fairly efficient.
I'm sure that this will be an ongoing thing, but for now...I have heat :)
Nov 3, 2011
Turkey-Day Running!
I decided to sign up for the 40th Annual Turkey Trot Run in Webster this year. I chose the "2.5 miler fun run" instead of the 4.4 miler. I figure, it may be Turkey day, but I don't want to go too crazy.
I know I could do both, but the run prohibits headphones. I always run with headphones. I'm sure I would be fine, but I like to listen to an audio book or podcast to help keep my mind active slightly distracted. When I don't run with headphones, I tend to analyze my run too much, and end up making it worse.
I focus on my breathing, and how it should be longer/deeper, or that my stride is not Gazelle enough.
If this goes well, maybe I'll do the 4.4 next year.
I know I could do both, but the run prohibits headphones. I always run with headphones. I'm sure I would be fine, but I like to listen to an audio book or podcast to help keep my mind active slightly distracted. When I don't run with headphones, I tend to analyze my run too much, and end up making it worse.
I focus on my breathing, and how it should be longer/deeper, or that my stride is not Gazelle enough.
If this goes well, maybe I'll do the 4.4 next year.
Almost 20 weeks!
Robyn has another midwife appointment today. This will be the 20 week checkup...
I can't believe it is already 20 weeks in! This appointment won't include the Ultrasound; we couldn't find a time that worked to have them back to back. We had back for that on Tuesday.
I think we're not going to find out what the sex of the baby will be. We had toyed with the idea of having the tech seal it in an envelope, and opening it on Christmas as a "gift."
Our Friends Brendan and Rabia had a cake made with the color of the cake signifying the baby's gender. I really liked that idea. I was trying to think of way to take that idea and modify it a bit to make it our own, but I can't think of anything.
If we did decide to find out, anyone have a cool idea for finding out the Sex of your baby?
I can't believe it is already 20 weeks in! This appointment won't include the Ultrasound; we couldn't find a time that worked to have them back to back. We had back for that on Tuesday.
I think we're not going to find out what the sex of the baby will be. We had toyed with the idea of having the tech seal it in an envelope, and opening it on Christmas as a "gift."
Our Friends Brendan and Rabia had a cake made with the color of the cake signifying the baby's gender. I really liked that idea. I was trying to think of way to take that idea and modify it a bit to make it our own, but I can't think of anything.
If we did decide to find out, anyone have a cool idea for finding out the Sex of your baby?
Nov 2, 2011
iPad blogging?
How efficient is it to blog while on an iPad? Or more to the point, how efficient am I at blogging on an iPad?
Right off the bat, I would have to say...less than on a laptop/computer. I have trouble deciding if I should be typing in portrait or landscape, and then if I should use the standard keyboard or the split. So far leaning towards split in landscape. There seems to be less corrections that need to be made when compared to portrait either style or standard keyboard landscape.
I could see proving comments, uploading a quick picture, but much else has me reaching for my laptop.
iPad to tweet? Definitely.
iPad to blog longer than a tweet? Not so much.
Right off the bat, I would have to say...less than on a laptop/computer. I have trouble deciding if I should be typing in portrait or landscape, and then if I should use the standard keyboard or the split. So far leaning towards split in landscape. There seems to be less corrections that need to be made when compared to portrait either style or standard keyboard landscape.
I could see proving comments, uploading a quick picture, but much else has me reaching for my laptop.
iPad to tweet? Definitely.
iPad to blog longer than a tweet? Not so much.
Nov 1, 2011
My cr-48 review
It has been almost 10 months since I started this crazy thing. I think it is time to revise and publish!
Abouta week ten months ago, I was surprised to come home and find a Google Chrome OS laptop (henceforth called cr-48, or Carl) waiting for me by my door. In my excitement I failed to make an "unboxing" video or even snap pictures of it in its case. All attempts to coax Carl back into his shipping box failed, so you'll have to use your imagination.
Let's start first with a breakdown of the hardware. On the outside, Carl is striking. Carl is matte black, with NO logos anywhere. Included in the box was a business card letting me know Intel was inside. Google also included "stickers" to decorate Carl. It gives him a bit of flair, but even without, I'm drawn to the simple, sleek style. I wish all laptops looked like this.
As far as the keyboard is concerned, it's one of the better Chiclet style keyboards I've used. Initially, while typing, I found my palms rested right on the trackpad caused it to activate, but after tweaking the sensitivity, it seems to have improved. The functions keys have been replaced by Chrome OS specific keys, such as forward, back, reload, mute, volume up/down, full screen, and brightness controls. The one button that
gdgt has a great breakdown of what's inside Carl. I'll give you a minute to read it...don't worry, I'll wait.
Great job huh? Anyway, as you can see, the hardware isn't Alienware crazy hardware, but a pretty decent year old netbook. I didn't realize there was bluetooth, as there isn't any indication of how to use it in the settings menu. Perhaps in a future system update, but for now I can't seem to make it work.
I've been using Carl as my main machine at home, and as my travel machine at work. For that approach, this is
Here are the notes I took while using the Carl:
Cons:
Pros:
About
Let's start first with a breakdown of the hardware. On the outside, Carl is striking. Carl is matte black, with NO logos anywhere. Included in the box was a business card letting me know Intel was inside. Google also included "stickers" to decorate Carl. It gives him a bit of flair, but even without, I'm drawn to the simple, sleek style. I wish all laptops looked like this.
As far as the keyboard is concerned, it's one of the better Chiclet style keyboards I've used. Initially, while typing, I found my palms rested right on the trackpad caused it to activate, but after tweaking the sensitivity, it seems to have improved. The functions keys have been replaced by Chrome OS specific keys, such as forward, back, reload, mute, volume up/down, full screen, and brightness controls. The one button that
gdgt has a great breakdown of what's inside Carl. I'll give you a minute to read it...don't worry, I'll wait.
Great job huh? Anyway, as you can see, the hardware isn't Alienware crazy hardware, but a pretty decent year old netbook. I didn't realize there was bluetooth, as there isn't any indication of how to use it in the settings menu. Perhaps in a future system update, but for now I can't seem to make it work.
I've been using Carl as my main machine at home, and as my travel machine at work. For that approach, this is
Here are the notes I took while using the Carl:
Cons:
- Sound static issue is a problem UPDATE: sound fixed!!
- No Java Support
No way to change profile picturenow you can!!- No backlight on keyboard
- No local storage to store pictures/videos
- Flash video playback is choppy UPDATE: flash is better, but still choppy
- Laggy performance
- Google Docs, opening document not as instantaneous as on win7 laptop
- While on lap, accidental touch pad activation a concern.
- So Now I’m writing with my hands near the touch pad...seems to be better.
Pros:
- Super Fast boot time
- Browser Sync
- Automatic (and quiet) updates
- Decent keyboard feel
- Great battery life (~ 6-7 hours of use)
- Great integration with google products (expected, but nice)
- Screen flip button
- Ctrl+n to open a new window. Dedicated key to switch (where f5 is) between screens. Great way to solve the side-by-side window use in Other OSes. Very quick. Always goes to the right, use shift to the left. Great!
- Sleek design.
- Lack of any Logos makes it really appealing
- web app store has good selection of apps/links to offset lack of local apps.
Oct 31, 2011
Planning Quasi-Giving
Robyn and I are planning a feast for us and a few friends. We're calling it Peterson Thanksgiving, and there will be lots of food.
Mostly because three of the attendees are pregnant and should be feeling fine...and hungry :)
I'm going to use this entry to begin the planning stages of what we will have to eat at this Party.
Total number of Guests: Currently 8 confirmed (6 adults, 2 kids).
Mostly because three of the attendees are pregnant and should be feeling fine...and hungry :)
I'm going to use this entry to begin the planning stages of what we will have to eat at this Party.
Total number of Guests: Currently 8 confirmed (6 adults, 2 kids).
Menu
Appetizers
- Soup - Minestrone?
- Fresh Rolls
Salad?- Corn-Kale Fritters!
Main Course
- Turkey(s?)
- Homemade Cranberry Sauce
- Homemade Mashed potatoes
- Cauliflower dish (Robyn's Oma's Recipe)
- GRAVY
- Fresh homemade bread
- Stuffing
- Stuffed Acorn Squash?
Dessert
- Pumpkin Pie
- Apple Pie?
Drinks
- Mulled Cider
- Milk
- Soda
- Wine?
- Sparkling Grape juice?
There's a lot of prep that will be involved. I"m also missing a few things, like Green leafy things. I added Salad, but not completely set on it.
Well, this will evolve with time...but I have a little over a week to prepare..Yikes!
Oct 29, 2011
Tiring, but fantastic Day!
Today, really tired me out.
Robyn and I threw a pumpkin carving party at our house. To prepare for the event, we prepared a mighty feast: Apple cake, Banana Bread, Garlic Toast, and Homemade Meatball Sauce. Robyn and I took turns prepping and watching Anya. I was going to bake a traditional loaf for the garlic, but Robyn knew there wouldn't be time, so she picked up a couple of crusty loaves at Wegmans yesterday.
We had 5 people (Brendan, Jack, Stacey, Brett, and Andy)show up, which was great and helped make our house feel small :) Brendan brought two delicous pies; Sweet potato Pecan, and Traditional pumpkin to add to our feast. There was so much good food! I tried to convince Andy he needed to eat more than one slice of pie, but it didn't work...plus, combined with the 78 degree house (thank you stove for working!) I'm pretty sure it would have put him in a coma, or at least a really nice nap. :)
It was an amazing time, just sitting, talking, eating, and enjoying time with friends. The kids were quite entertaining. At one point, all the adults were in the computer room carving, and the two little ones took off for the kitchen. I went in to see what mischief they were getting into. I walk in, and Jack was on the table, with half a loaf of banana bread in his hand, while Anya, more than likely, was directing him where to go. I simply said "HELLO! I see you would like some more bread."
Jack's face was priceless. Just a quick glance around, as if he was saying "what? me? Oh sure." Anya looked concerned like she was about to get scolded, but then realized that it was ok, and threw on her telltale grin.
Here are a few quick pictures from the carving:
Side note: both my Droid X and our Camera take HORRIBLE low light pictures. I'm not sure if any Mobile phone camera can take a good low light photo, but I think might be time to retire the Konica Minolta DeImage A200.
After everyone left, Robyn made the point that if we do this again next year with just the same set of people, there will be three more kids. I then realized that Robyn, Stacey, and Rabia are all due within a couple months of each other.
Awesome.
Robyn and I threw a pumpkin carving party at our house. To prepare for the event, we prepared a mighty feast: Apple cake, Banana Bread, Garlic Toast, and Homemade Meatball Sauce. Robyn and I took turns prepping and watching Anya. I was going to bake a traditional loaf for the garlic, but Robyn knew there wouldn't be time, so she picked up a couple of crusty loaves at Wegmans yesterday.
We had 5 people (Brendan, Jack, Stacey, Brett, and Andy)show up, which was great and helped make our house feel small :) Brendan brought two delicous pies; Sweet potato Pecan, and Traditional pumpkin to add to our feast. There was so much good food! I tried to convince Andy he needed to eat more than one slice of pie, but it didn't work...plus, combined with the 78 degree house (thank you stove for working!) I'm pretty sure it would have put him in a coma, or at least a really nice nap. :)
It was an amazing time, just sitting, talking, eating, and enjoying time with friends. The kids were quite entertaining. At one point, all the adults were in the computer room carving, and the two little ones took off for the kitchen. I went in to see what mischief they were getting into. I walk in, and Jack was on the table, with half a loaf of banana bread in his hand, while Anya, more than likely, was directing him where to go. I simply said "HELLO! I see you would like some more bread."
Jack's face was priceless. Just a quick glance around, as if he was saying "what? me? Oh sure." Anya looked concerned like she was about to get scolded, but then realized that it was ok, and threw on her telltale grin.
Here are a few quick pictures from the carving:
 |
| From Oct 2011 |
Side note: both my Droid X and our Camera take HORRIBLE low light pictures. I'm not sure if any Mobile phone camera can take a good low light photo, but I think might be time to retire the Konica Minolta DeImage A200.
After everyone left, Robyn made the point that if we do this again next year with just the same set of people, there will be three more kids. I then realized that Robyn, Stacey, and Rabia are all due within a couple months of each other.
Awesome.
Oct 28, 2011
Why I write
I've started to write here more frequently. I've also changed my approach and style a little bit which I think makes it easier to write.
When I first started blogging, I did it because I thought I needed to. Being a technical guy, part of the allure was getting my site off the ground. Could I take a domain name, MY name, and build a site that reflected who I am...virtually?
As with most of my ideas, the technical part was easy, it was the creative requirements that sunk me.
I started out with a simple plan of writing three entries a week. I didn't want to lock myself in specific topics: I wanted it to reflect myself and the events of the day/week rather than beholden to a thematic overlord. At first, it didn't seem to bad. I'd write up a quick entry about the "going ons" in my personal life, and move on.
It didn't last more than about two entries before I began to succumb to one of my main character flaws: sensitive over thinking. Let's take a peek inside my brain preparing for an entry about Work:
As you can see, I think A LOT about what others may think of my entries. I definitely don't want to jeopardize my career over a quick, terse entry about something that I usually get over within a matter of hours, but if I don't write/talk about it, the post has a tendency to simmer and stew, and start to boil over into other thoughts and eventually could become all consuming until I finally talk it out or just go to sleep.
With respect to Friends and family, I am in a similar boat. If there's a situation that arises that stirs up strong emotions, I need to talk/write to collate my emotions, to better understand where they are coming from. Am I upset/worried because deep down I don't agree with their choice/thoughts relating to the emotional situation? Am I jealous/envious of them about something else that is tainting my perception of the situation that could lead me down a path of unpleasantness?
In the past few years of running my own site (and a blogger site before that) I have spent more time trying to predict reactions about a still-to-be-written post, than actually writing.
The times when I do write, I try to edit on the fly. I don't ever get the thought all the way down before I try to shape it into a flowing narrative. I tried to do stream of consciousness, but it didn't work out for me. In my own critical eye, it sounded less than brillant.
I get so caught up in other people's perceptions, that I cut off an avenue to express myself and to help me learn to articulate my thoughts and feelings in a more concise matter.
Instead, I let it build up, and try to talk with Robyn about it. Don't get me wrong, I love talking to my wife and getting her insight/opinion, but She can't be the only one. I can't expect her to have all the answer: I need to reach out to more people.
I've got a few co-workers now that I feel comfortable enough to talk about work related issues, and a few personal things, but I still have a bit of a reserved attitude. I could understand if I had been burned by a peer in the past, but I can't think of an instance of that happening. I have no good reason hold back (at least professionally) with the people at work I feel I can talk with, but yet I do. I think that my over thinking sensitiveness is showing through still.
So, what does this all have to do with my resurgence of writing? Not much, at least directly.
I've decided to write more, mostly because I've decided it's time. I've reach a point in my life that I'm comfortable enough to use my blog for its intended purpose: reflect who I am online, and give me an outlet to hone my thoughts. Does this mean I'm going to start writing about every little thing that happens in my life? Probably not. I'll more than likely not bring work into the mix...this is MY blog about MY life. I have enough to parse through outside of work, I'll leave my work concerns there.
What you can expect to see, is more posts like the ones about the stove. Posts that I use to discuss my feelings of inexperience, inadequacies, frustration, excitement, and satisfaction. I need to work on identifying my feelings and their origins, and if they are less than helpful emotions, figure out how to work through them to be able to move on without always having a tiny spot in the back of my mind that keeps making its way to the surface.
The stove entries were very cathartic for me, and afterwards, I slept much better...even if I was a bit chilly :)
So here's to a new blog, and a new me. More of the old...but hopefully not as much as before.
When I first started blogging, I did it because I thought I needed to. Being a technical guy, part of the allure was getting my site off the ground. Could I take a domain name, MY name, and build a site that reflected who I am...virtually?
As with most of my ideas, the technical part was easy, it was the creative requirements that sunk me.
I started out with a simple plan of writing three entries a week. I didn't want to lock myself in specific topics: I wanted it to reflect myself and the events of the day/week rather than beholden to a thematic overlord. At first, it didn't seem to bad. I'd write up a quick entry about the "going ons" in my personal life, and move on.
It didn't last more than about two entries before I began to succumb to one of my main character flaws: sensitive over thinking. Let's take a peek inside my brain preparing for an entry about Work:
"OK. Time to write up a quick post. What should I write about? Oh! How about my rising frustration with my boss <insert topic here>? Yeah, I could write to help collect my thoughts, and be better prepared to go back and go another round about this."
"Hmm...When I applied for my job, I used my domain email...so he must know I have a domain...what if he reads this? He hasn't said anything about it before....maybe he's just silently checking up on it..."
"Gah, getting off topic...maybe I'll just write about it...but not make it specific enough so he would know it was me...Who would read that? It wouldn't have any substance!"
"F*$% this...Maybe I'll write about <insert Personal Topic here>. I've been meaning to try to parse out my thoughts on it anyway.."
"What if My Mom/Dad/Family member/close friend/acquaintance reads this? Could this somehow negatively impact my relationship with them?"
"No, not going to write about that either...Maybe I'll write a fiction piece..."
"..."
"...I don't have any ideas...Screw this, I'll just browse around MySpace/Facebook/G+/Social network of the day."
As you can see, I think A LOT about what others may think of my entries. I definitely don't want to jeopardize my career over a quick, terse entry about something that I usually get over within a matter of hours, but if I don't write/talk about it, the post has a tendency to simmer and stew, and start to boil over into other thoughts and eventually could become all consuming until I finally talk it out or just go to sleep.
With respect to Friends and family, I am in a similar boat. If there's a situation that arises that stirs up strong emotions, I need to talk/write to collate my emotions, to better understand where they are coming from. Am I upset/worried because deep down I don't agree with their choice/thoughts relating to the emotional situation? Am I jealous/envious of them about something else that is tainting my perception of the situation that could lead me down a path of unpleasantness?
In the past few years of running my own site (and a blogger site before that) I have spent more time trying to predict reactions about a still-to-be-written post, than actually writing.
The times when I do write, I try to edit on the fly. I don't ever get the thought all the way down before I try to shape it into a flowing narrative. I tried to do stream of consciousness, but it didn't work out for me. In my own critical eye, it sounded less than brillant.
I get so caught up in other people's perceptions, that I cut off an avenue to express myself and to help me learn to articulate my thoughts and feelings in a more concise matter.
Instead, I let it build up, and try to talk with Robyn about it. Don't get me wrong, I love talking to my wife and getting her insight/opinion, but She can't be the only one. I can't expect her to have all the answer: I need to reach out to more people.
I've got a few co-workers now that I feel comfortable enough to talk about work related issues, and a few personal things, but I still have a bit of a reserved attitude. I could understand if I had been burned by a peer in the past, but I can't think of an instance of that happening. I have no good reason hold back (at least professionally) with the people at work I feel I can talk with, but yet I do. I think that my over thinking sensitiveness is showing through still.
So, what does this all have to do with my resurgence of writing? Not much, at least directly.
I've decided to write more, mostly because I've decided it's time. I've reach a point in my life that I'm comfortable enough to use my blog for its intended purpose: reflect who I am online, and give me an outlet to hone my thoughts. Does this mean I'm going to start writing about every little thing that happens in my life? Probably not. I'll more than likely not bring work into the mix...this is MY blog about MY life. I have enough to parse through outside of work, I'll leave my work concerns there.
What you can expect to see, is more posts like the ones about the stove. Posts that I use to discuss my feelings of inexperience, inadequacies, frustration, excitement, and satisfaction. I need to work on identifying my feelings and their origins, and if they are less than helpful emotions, figure out how to work through them to be able to move on without always having a tiny spot in the back of my mind that keeps making its way to the surface.
The stove entries were very cathartic for me, and afterwards, I slept much better...even if I was a bit chilly :)
So here's to a new blog, and a new me. More of the old...but hopefully not as much as before.
Two Hours in...
And the stove is holding steady!
The new board (along with some more sealant around the draft pipe) and The stove is humming away.
We'll see how it goes this weekend, but I'm be cautiously optimistic :).
The new board (along with some more sealant around the draft pipe) and The stove is humming away.
We'll see how it goes this weekend, but I'm be cautiously optimistic :).
Oct 27, 2011
Stove Newb...
In our last adventure, we walked down memory lane on how I came to be the proud owner of a Pellet stove.
In this installment, we learn how said stove has put me outside my element and challenging me in ways I'm not used to, and don't particularly like.
I've been thinking about this stove non-stop when I'm at home..mostly because I have reminders all around me: The stove sitting there unplugged, the shiny stove pipe on the side of my house, Bags of Pellets sitting in my basement, and the sound of the boiler running while the stove is out of commission.
The Stove is my first real big expensive purchase since the house. IT is meant to help curb us of our Fuel Oil ways, and save us money.
It's sitting there...broken.
I'm currently waiting for a new Controller board to arrive to fix it, but my confidence with the stove is extremely low. Before I could call Support ( they are only open 8-5 m-f) I tried to use my Troubleshooting skills to determine the root cause of the issue. I ran the diagnostics of the stove, and it appears that air was leaking out of the stove. I checked the gaskets, and quickly decided that the Door gasket needed to be replaced. I bought a replacement 5/8" rope gasket and installed it.
I'm pretty sure that made it worse. With my confidence shaken, I started down the path of trying to correct the newly installed gasket. I got some hi-temp silicone sealant and used that to push the gasket out more to create an airtight door seal. I couldn't help myself and kept trying to "fix" it even more.
What I'm left with now is a gasket that is probably complete and udder shit. It is airtight, but that is not the intended use of the sealant. It may melt onto the stove.
I can admit that.
It is ok. This is my first stove, and I'm learning. I need to take my work ethos and step back when I'm getting stressed/overwhelmed and re-evaluate the situation.
Worst case: I need a new $8 gasket and $7 of sealant.
Deep breaths, Deep breaths.
In this installment, we learn how said stove has put me outside my element and challenging me in ways I'm not used to, and don't particularly like.
I've been thinking about this stove non-stop when I'm at home..mostly because I have reminders all around me: The stove sitting there unplugged, the shiny stove pipe on the side of my house, Bags of Pellets sitting in my basement, and the sound of the boiler running while the stove is out of commission.
The Stove is my first real big expensive purchase since the house. IT is meant to help curb us of our Fuel Oil ways, and save us money.
It's sitting there...broken.
I'm currently waiting for a new Controller board to arrive to fix it, but my confidence with the stove is extremely low. Before I could call Support ( they are only open 8-5 m-f) I tried to use my Troubleshooting skills to determine the root cause of the issue. I ran the diagnostics of the stove, and it appears that air was leaking out of the stove. I checked the gaskets, and quickly decided that the Door gasket needed to be replaced. I bought a replacement 5/8" rope gasket and installed it.
I'm pretty sure that made it worse. With my confidence shaken, I started down the path of trying to correct the newly installed gasket. I got some hi-temp silicone sealant and used that to push the gasket out more to create an airtight door seal. I couldn't help myself and kept trying to "fix" it even more.
What I'm left with now is a gasket that is probably complete and udder shit. It is airtight, but that is not the intended use of the sealant. It may melt onto the stove.
I can admit that.
It is ok. This is my first stove, and I'm learning. I need to take my work ethos and step back when I'm getting stressed/overwhelmed and re-evaluate the situation.
Worst case: I need a new $8 gasket and $7 of sealant.
Deep breaths, Deep breaths.
How I arrived at owning a Pellet Stove.
I'm beginning to realize that having a stove is more work than what I anticipated. I'm writing this as retrospective as to how I got here...soon to be followed by where I am :)
When Robyn and I were thinking about alternative heat sources to replace our Fuel Oil supplied Base board heaters, we discussed several options.
We first discussed just replacing the fuel source: Put in a gas burning boiler and get rid of Fuel Oil entirely.
This would be the easiest from a "Living Room Modification" standpoint, as we could use the existing heat pipes, pumps and thermostats. In the basement, we would have to remove the old boiler and the fuel oil tank...two daunting tasks.
Unfortunately, this task was outweighed by an even more dissuading one: The fact we have no natural gas lines into the house. I spent a good deal of time during the summer researching what it would take to get Gas lines run to the house. Our local provider, RG&E would run a line (100' max) to our house for free. From there, we call in a contractor to then run the lines inside the house. The only requirement They had is the Gas appliance has to be purchased prior to them running the line. I get that, they don't want to run a line for a promise, but a guarantee.
Having Gas in the house would also be nice in case we wanted to ever switch our our Electric range or dryer for a gas equivalent.
We ultimately decided that we WILL run a gas line someday, but probably not for a year or two.
Next, we briefly talked about a furnace. This talk broke down real quick as it would require extensive duct work, and something to heat the air. They make Electric Furnaces, but they are expensive.
Wood burning stoves was the next avenue we went down. Robyn's Parents have a wood stove in their house, and have for over 30 years. The heat that the stove is capable of is great, and the range seems to be significant. Starting the fire is simple, and if you get a big enough stove, it can be packed at night and last until the morning.
The thought of having to buy, and potentially split enough wood to heat our home started to give us reservations. It isn't that we are unable to do it, it is more a question of do I want to do it. I enjoy splitting wood on camping trips or during the occasional fire in our backyard. Getting up and going out to the cold garage everyday to split? Not the most exciting idea. The other show stopper for the wood stove was the lack of a good chimney that could be utilized for the exhaust.
By the time we arrived at the Pellet Stove idea, it seemed like we reached the Zenith of our talks. It provided us with the output similar to a wood stove, yet more convenient. Loading bags of sawdust pellets every day is pretty simple, and if need be, Robyn could do it. The Exhaust requirements are straight forward, and easy to do (as long as you have the correct tools, and Patient friends and family).
We committed ourselves to the Pellet Stove idea, and began down that path. Which leads us to....
When Robyn and I were thinking about alternative heat sources to replace our Fuel Oil supplied Base board heaters, we discussed several options.
We first discussed just replacing the fuel source: Put in a gas burning boiler and get rid of Fuel Oil entirely.
This would be the easiest from a "Living Room Modification" standpoint, as we could use the existing heat pipes, pumps and thermostats. In the basement, we would have to remove the old boiler and the fuel oil tank...two daunting tasks.
Unfortunately, this task was outweighed by an even more dissuading one: The fact we have no natural gas lines into the house. I spent a good deal of time during the summer researching what it would take to get Gas lines run to the house. Our local provider, RG&E would run a line (100' max) to our house for free. From there, we call in a contractor to then run the lines inside the house. The only requirement They had is the Gas appliance has to be purchased prior to them running the line. I get that, they don't want to run a line for a promise, but a guarantee.
Having Gas in the house would also be nice in case we wanted to ever switch our our Electric range or dryer for a gas equivalent.
We ultimately decided that we WILL run a gas line someday, but probably not for a year or two.
Next, we briefly talked about a furnace. This talk broke down real quick as it would require extensive duct work, and something to heat the air. They make Electric Furnaces, but they are expensive.
Wood burning stoves was the next avenue we went down. Robyn's Parents have a wood stove in their house, and have for over 30 years. The heat that the stove is capable of is great, and the range seems to be significant. Starting the fire is simple, and if you get a big enough stove, it can be packed at night and last until the morning.
The thought of having to buy, and potentially split enough wood to heat our home started to give us reservations. It isn't that we are unable to do it, it is more a question of do I want to do it. I enjoy splitting wood on camping trips or during the occasional fire in our backyard. Getting up and going out to the cold garage everyday to split? Not the most exciting idea. The other show stopper for the wood stove was the lack of a good chimney that could be utilized for the exhaust.
By the time we arrived at the Pellet Stove idea, it seemed like we reached the Zenith of our talks. It provided us with the output similar to a wood stove, yet more convenient. Loading bags of sawdust pellets every day is pretty simple, and if need be, Robyn could do it. The Exhaust requirements are straight forward, and easy to do (as long as you have the correct tools, and Patient friends and family).
We committed ourselves to the Pellet Stove idea, and began down that path. Which leads us to....
Oct 26, 2011
Truck passed!
Well, I managed to get my truck into the mechanic today to:
I mean, I love my truck, but with the impending arrival of kid #2, having a vehicle that can only seat 2 adults, or one adult and one car seat doesn't seem practical. I'd like to keep it for another year, just to gain a little more ground before having to buy another car.
- Get the stuff fixed to pass inspection ( two tires and a windshield wiper...didn't realize that was a inspection thing!)
- Take a look at the heat issue
- Take a look a the funny throttle yesterday (if I attempted to put more than a feather's weight of pressure, truck would pulse)
Under $500 later, I have a Truck that passed inspection, a SPARE TIRE, and an experience with a mechanic where I didn't feel like an a$$hole for asking them to fix something.
The Throttle was apparently a clog in the fuel line. The heat is a slightly longer tale.
Apparently there are two tiny leaks in my truck: one in the radiator and one in the intake(I think?). These leaks are really tiny, and could not cause a significant loss in fluid for months, or years. The Mechanic said if I planned on keeping the truck for "a long time" I should replace them...at ~$1000.00.
Considering my truck is 10 years old and has over 100,000 miles, I don't know how long term I'll still have the truck.
I mean, I love my truck, but with the impending arrival of kid #2, having a vehicle that can only seat 2 adults, or one adult and one car seat doesn't seem practical. I'd like to keep it for another year, just to gain a little more ground before having to buy another car.
..or more likely the MINIVAN Robyn wants :)
Oct 25, 2011
Stove Part Delivery
Called the stove company to get an estimate of when the part would arrive, as it had not shown up today.
...Apparently it will be 5-7 Business days....
Sigh...
...Apparently it will be 5-7 Business days....
Sigh...
Oct 24, 2011
I must have pissed them off or something...
I took a sick day today to try to avoid getting massively sick. I ended up taking a nap, and around 1:30 I felt pretty good. I wanted to get out and accomplish something, and since my truck's inspection is due at the end of the month, I thought I would head to a local repair shop to do this.
I pulled in, briskly walk in to avoid the rain, and I'm greeted by three mechanics standing in the main office. Right off the bat, I had a feeling like they were pissed at me.
Me: "Hey! How's it going?"
Guy 1: "...good."
Me: "Cool. Can I get my truck inspected?"
Guy 2 and three walk away, not really making eye contact.
Guy 1: "Well, I'll need your registration."
Me: "Sure. <Places Registration on the table>"
Guy 1 grabs a form and places it on the table.
Guy 1: "<circles the top CUSTOMER INFORMATION Area> Here. Fill out the top ONLY." <-- Not sure why he placed such emphasis.
Me: "Ok."
Guy 1: "Anything else?"
Me: "I don't think so. I've got a little more time before I need to rotate my tires and change the oil."
I fill out the form, and the takes my keys. A few seconds later, the truck is in and up on the lift.
20 minutes later, the truck is pulled up in front of the waiting area. Guy 1 gets out, with the truck still running. He walks into the garage, and comes back in about a minute later.
Guy 1: "All set. That'll be $21"
Me: "Great!"
I take a look at the form, and it appears that there are notes on the form
Guy 1: "Sign here. <hands me the credit receipt, I sign it, and he takes it back>"
Me: "...So, anything I need to worry about? Am I all set?"
Guy 1: "Nope. It failed."
Me: "...um, ok. What do I need to have done?"
Guy 1: "Driver's side rear tire, and a driver's side windshield wiper. Here's your receipt, and the printout. It will be $10 to re-test. You'll need this when you come back....IF you come back. Goodbye."
At this point, the guy just walks away. Stunned, I walk out to my running truck.
As I get in the truck, I realize something is amiss....The window was down! Now, the actual time the window was open, was about 2-3 minutes...
Why did you put the window down IN THE RAIN?
I left, and my patience was definitely thin at this point.
The thing that really got to me is they didn't even try to sell me tires, which they have in stock, or wipers, which are right next to the counter.
The entire experience just left a bitter taste in my mouth. I honestly want to like them since they are not too far away from my house, but this is the second time in a row I felt like I did something that offended them...by showing up to give them money.
Maybe I'm overreacting, maybe I'm making it bigger than it needs to be, but it just felt odd.
I pulled in, briskly walk in to avoid the rain, and I'm greeted by three mechanics standing in the main office. Right off the bat, I had a feeling like they were pissed at me.
Me: "Hey! How's it going?"
Guy 1: "...good."
Me: "Cool. Can I get my truck inspected?"
Guy 2 and three walk away, not really making eye contact.
Guy 1: "Well, I'll need your registration."
Me: "Sure. <Places Registration on the table>"
Guy 1 grabs a form and places it on the table.
Guy 1: "<circles the top CUSTOMER INFORMATION Area> Here. Fill out the top ONLY." <-- Not sure why he placed such emphasis.
Me: "Ok."
Guy 1: "Anything else?"
Me: "I don't think so. I've got a little more time before I need to rotate my tires and change the oil."
I fill out the form, and the takes my keys. A few seconds later, the truck is in and up on the lift.
20 minutes later, the truck is pulled up in front of the waiting area. Guy 1 gets out, with the truck still running. He walks into the garage, and comes back in about a minute later.
Guy 1: "All set. That'll be $21"
Me: "Great!"
I take a look at the form, and it appears that there are notes on the form
Guy 1: "Sign here. <hands me the credit receipt, I sign it, and he takes it back>"
Me: "...So, anything I need to worry about? Am I all set?"
Guy 1: "Nope. It failed."
Me: "...um, ok. What do I need to have done?"
Guy 1: "Driver's side rear tire, and a driver's side windshield wiper. Here's your receipt, and the printout. It will be $10 to re-test. You'll need this when you come back....IF you come back. Goodbye."
At this point, the guy just walks away. Stunned, I walk out to my running truck.
As I get in the truck, I realize something is amiss....The window was down! Now, the actual time the window was open, was about 2-3 minutes...
Why did you put the window down IN THE RAIN?
I left, and my patience was definitely thin at this point.
The thing that really got to me is they didn't even try to sell me tires, which they have in stock, or wipers, which are right next to the counter.
The entire experience just left a bitter taste in my mouth. I honestly want to like them since they are not too far away from my house, but this is the second time in a row I felt like I did something that offended them...by showing up to give them money.
Maybe I'm overreacting, maybe I'm making it bigger than it needs to be, but it just felt odd.
Stove saga continues!
Well...
Looks like stove is still "a work in progress."
Spent the morning on the phone with Tech Support at US Stove. After trying several different things, they believe the controller board may be faulty on my stove. They are sending one (overnight I think) to swap ou the bad one.
Quick note: If you want to adjust the threshold for the Draft Fan on a 5500M, just hold down the draft fan up and the aux up simultaneously..this will change the higher threshold. Press on when you have it set to what you want. Repeat for the lower threshold by holding down Draft Fan down and Aux down.
We'll see!
Looks like stove is still "a work in progress."
Spent the morning on the phone with Tech Support at US Stove. After trying several different things, they believe the controller board may be faulty on my stove. They are sending one (overnight I think) to swap ou the bad one.
Quick note: If you want to adjust the threshold for the Draft Fan on a 5500M, just hold down the draft fan up and the aux up simultaneously..this will change the higher threshold. Press on when you have it set to what you want. Repeat for the lower threshold by holding down Draft Fan down and Aux down.
We'll see!
Oct 22, 2011
First Early Morning fun with the stove!
Well, we had an exciting morning today!
Around 1:30, I woke up and smelled smoke in the house. It took me about 30 seconds to realize this is "not a good thing" and got downstairs to take a look. The Glass of the stove was covered on the inside with black soot. The fire was still burning ok, but there was a haze in the house. I shut down the stove, opened the windows and let the house air a bit. Around 6:30, I cleaned out the stove and tried to piece together what happened.
Here's my current hypothesis:
Around 1:30, I woke up and smelled smoke in the house. It took me about 30 seconds to realize this is "not a good thing" and got downstairs to take a look. The Glass of the stove was covered on the inside with black soot. The fire was still burning ok, but there was a haze in the house. I shut down the stove, opened the windows and let the house air a bit. Around 6:30, I cleaned out the stove and tried to piece together what happened.
Here's my current hypothesis:
- When I cleaned out the ash pot yesterday, I didn't push the latch all the way down, allowing the ash to flow into the burn chamber more than it should have
- There was quite a bit of wind last night. This, combined with the excess ash, caused a backdraft scenario that allowed some smoke to come back into the house.
I checked the exhaust piping for any leaks taht might have caused the smoke, but could not find any. There is a spot around the door gasket that looks a bit singed, but it is still an airtight seal. The flame does not appear to be lazy, and three hours into today's burn, and the window is still almost as clear as the cleaning this morning.
I'm definitely going to keep an eye on it, but I think we are ok. Hickory smoked, but ok :).
Oct 20, 2011
Home repairs #2: The Dryer
Another project I tackled between the stove installation/inspection was the faulty dryer.
About two weeks ago, the dryer just stopped heating at all. I started to do some research into the probable causes. Several fixit sites pointed to either a faulty heating element, fuse, or temperature sensor. Considering replacing all three of these would be under $100, I figured it was worth a shot.
I started by pulling my dryer apart, the correct way: I found the owner's manual online that showed me how to replace said parts. After I opened it up, I discovered another problem: the bottom was covered in a 1/2" thick layer of lint. The lint trap harness was not properly sealed to the dryer and was letting lint through. This apparently is another common problem with old dryers. I proceeded to clean it up the best I could, and removed the Heating element. Thankfully, all the parts that were potentially going to be replaced, were attached to the back of the heating element. I grabbed by trusty Multi-Meter and tested almost each part ( more on that in a minute).
When I tested the full circuit, it gave me a reading of infinite resistance, which means the circuit was open somewhere. The main heating element itself passed, so I moved onto the thermometer...which fell apart as I attempted to take it off.
"No problem!" I thought. "Super simple fix! I'm done!" I went to my old friend, Internet, and ordered the $5 part and paid $7 shipping....because I was impatient. Two days later, the part arrived, and I installed the new thermometer and believed I was on my way...
...Home repair fact #34: If there is the possibility of more than one broken part, and you don't test all of them, you'll have more than one broken part.
Sure enough, replacing only the thermometer didn't fix my dryer. I did what I should have done in the first place, and tested all the parts. I discovered the Safety fuse was blown. Apparently, this is very common in old dryers, as the lint buildup causes the temperature to rise above the safety limit. The fuse did what it was supposed to and blew to open the circuit to stop the drying from catching fire.
I went back to the internet, and ordered another $5 part and spent $7 on shipping....because again, I was impatient. I'm sure I could have found the parts locally, or found a better deal once I knew which parts to replace, but I needed to get my dryer back up and running quickly...and not many places are open at 9pm on a Wednesday.
The second part arrived on Saturday, and I installed the fuse. I fired up the dryer, and it started drying clothes!
In retrospect, I think the dryer had been slowly dying since we bought the house. Originally, we thought it was because of the OVER 70 FOOT LONG exhaust with EIGHT 90 degree turns. Turns out (ha!) that it was more than that. My test load of a Comforter and a few sweatshirts dried in ONE cycle, instead of the normal 2.5...
I win!
About two weeks ago, the dryer just stopped heating at all. I started to do some research into the probable causes. Several fixit sites pointed to either a faulty heating element, fuse, or temperature sensor. Considering replacing all three of these would be under $100, I figured it was worth a shot.
I started by pulling my dryer apart, the correct way: I found the owner's manual online that showed me how to replace said parts. After I opened it up, I discovered another problem: the bottom was covered in a 1/2" thick layer of lint. The lint trap harness was not properly sealed to the dryer and was letting lint through. This apparently is another common problem with old dryers. I proceeded to clean it up the best I could, and removed the Heating element. Thankfully, all the parts that were potentially going to be replaced, were attached to the back of the heating element. I grabbed by trusty Multi-Meter and tested almost each part ( more on that in a minute).
When I tested the full circuit, it gave me a reading of infinite resistance, which means the circuit was open somewhere. The main heating element itself passed, so I moved onto the thermometer...which fell apart as I attempted to take it off.
"No problem!" I thought. "Super simple fix! I'm done!" I went to my old friend, Internet, and ordered the $5 part and paid $7 shipping....because I was impatient. Two days later, the part arrived, and I installed the new thermometer and believed I was on my way...
...Home repair fact #34: If there is the possibility of more than one broken part, and you don't test all of them, you'll have more than one broken part.
Sure enough, replacing only the thermometer didn't fix my dryer. I did what I should have done in the first place, and tested all the parts. I discovered the Safety fuse was blown. Apparently, this is very common in old dryers, as the lint buildup causes the temperature to rise above the safety limit. The fuse did what it was supposed to and blew to open the circuit to stop the drying from catching fire.
I went back to the internet, and ordered another $5 part and spent $7 on shipping....because again, I was impatient. I'm sure I could have found the parts locally, or found a better deal once I knew which parts to replace, but I needed to get my dryer back up and running quickly...and not many places are open at 9pm on a Wednesday.
The second part arrived on Saturday, and I installed the fuse. I fired up the dryer, and it started drying clothes!
In retrospect, I think the dryer had been slowly dying since we bought the house. Originally, we thought it was because of the OVER 70 FOOT LONG exhaust with EIGHT 90 degree turns. Turns out (ha!) that it was more than that. My test load of a Comforter and a few sweatshirts dried in ONE cycle, instead of the normal 2.5...
I win!
Day one of Stove use
So far, the stove is working wonderfully. The vent system is doing what it should: Venting the smoke out of the house!
The Stove is current set on HR-1, or Low heat. Current temperature outside: 51 degrees. Current temp inside: 82 downstairs, 78 upstairs. At these temperatures in the spring/fall last year, we were struggling to keep the downstairs at 67 and the upstairs at 68. Even then, the Boiler was running pretty much non-stop.
I plan to keep a log of when I add a bag to the stove, and the temperature range for the day, and Stove heat setting to help track of usage to plan for next year and see how we do.
We spent Just under $975 on Pellets. The stove, heat board and pipe work was about $1375, and another $55 for caulk and drywall. We just purchased a gate for $43. That puts the total cost of the Stove installation at around $2448.
According to NYSERDA, the current cost of Fuel oil is $3.65 per gallon, up from $2.79 last year. That puts us at around $730 to fill our tank. Last year, we went through around 800 gallons. ( I'll have to check that number...).
If the prices stay at $3.65, that would mean a cost of $2920 to to heat our house at the 67/68 degree mark through winter. That means, this year we'll spend about $472 LESS than we would have just using Fuel Oil, and have a house that will be warmer. I'll keep an eye on the price of Fuel Oil, and at the end of the month, I'll take the average price and compare to our usage last year. We went through almost a tank a month during December, January, February, and March. November and April were partial, so we'll say another tank. that's a Total of around 4 Fills. I'm not expecting this installation to pay for itself in one year, but it just might.
Here's a link to the picture gallery:
The Stove is current set on HR-1, or Low heat. Current temperature outside: 51 degrees. Current temp inside: 82 downstairs, 78 upstairs. At these temperatures in the spring/fall last year, we were struggling to keep the downstairs at 67 and the upstairs at 68. Even then, the Boiler was running pretty much non-stop.
I plan to keep a log of when I add a bag to the stove, and the temperature range for the day, and Stove heat setting to help track of usage to plan for next year and see how we do.
We spent Just under $975 on Pellets. The stove, heat board and pipe work was about $1375, and another $55 for caulk and drywall. We just purchased a gate for $43. That puts the total cost of the Stove installation at around $2448.
According to NYSERDA, the current cost of Fuel oil is $3.65 per gallon, up from $2.79 last year. That puts us at around $730 to fill our tank. Last year, we went through around 800 gallons. ( I'll have to check that number...).
If the prices stay at $3.65, that would mean a cost of $2920 to to heat our house at the 67/68 degree mark through winter. That means, this year we'll spend about $472 LESS than we would have just using Fuel Oil, and have a house that will be warmer. I'll keep an eye on the price of Fuel Oil, and at the end of the month, I'll take the average price and compare to our usage last year. We went through almost a tank a month during December, January, February, and March. November and April were partial, so we'll say another tank. that's a Total of around 4 Fills. I'm not expecting this installation to pay for itself in one year, but it just might.
Here's a link to the picture gallery:
 |
| Pellet Stove |
Oct 19, 2011
It passed
Fire Marshal stopped by today and said our stove passed! We could get the certificate in a couple of weeks, but we are all set to begin using our pellet stove!
Oct 10, 2011
Hopefully Soon...
This post will be replaced by a post entitled: "Stove Update: It Passed!"
I hope the Fire Marshal shows up tomorrow, as I haven't heard back from the messages left on Friday, but initially, we had setup tomorrow as the inspection day.
I've met all the requirements to the best of my knowledge...but I guess I'll find out if that's enough :)
I hope the Fire Marshal shows up tomorrow, as I haven't heard back from the messages left on Friday, but initially, we had setup tomorrow as the inspection day.
I've met all the requirements to the best of my knowledge...but I guess I'll find out if that's enough :)
Oct 5, 2011
Stove woes
Well,
We were close.
Fire Marshal stopped by today and said the stove was too low, by about .5"
Need a slightly thicker pad, and to rework the hole.
Looks like my weekend will busy!
Rented a reciprocating saw to make sure this goes super fast.
We were close.
Fire Marshal stopped by today and said the stove was too low, by about .5"
Need a slightly thicker pad, and to rework the hole.
Looks like my weekend will busy!
Rented a reciprocating saw to make sure this goes super fast.
Sep 24, 2011
Home projects: Heating!
This is my inaugural post in regards to home improvement projects.
Our first "Major" project will be to replace our Fuel-Oil based heating with a Wood Pellet Stove. Initially, we looked into having it done by a local resource. Unfortunately, the cost was almost 4 times the cost of doing it myself. Considering the specifications as to what needs to be done is all online or included with the stove, I'm going to take a stab at doing it myself.
On Thursday, I talked with the Fire Marshall about the prospect of doing this myself. He said that most people, if they take the time to read the instructions/UL requirements, can do this themselves. Once we are done with the installation, we just have to give the building office a call and they will verify our work. Feeling confident, I told him that Robyn would be down to pickup the permit the next day. $25 later, we have a piece of paper that says we can do it!
We picked up the King/Ashley 5500m Pellet Stove from our local TSC on sale. We also picked up the vent kit as well. This thing is a Beast! I'll post pictures of it tomorrow, after I have a few friends over to help get the darn thing out of my truck!
So, here we go!
Our first "Major" project will be to replace our Fuel-Oil based heating with a Wood Pellet Stove. Initially, we looked into having it done by a local resource. Unfortunately, the cost was almost 4 times the cost of doing it myself. Considering the specifications as to what needs to be done is all online or included with the stove, I'm going to take a stab at doing it myself.
On Thursday, I talked with the Fire Marshall about the prospect of doing this myself. He said that most people, if they take the time to read the instructions/UL requirements, can do this themselves. Once we are done with the installation, we just have to give the building office a call and they will verify our work. Feeling confident, I told him that Robyn would be down to pickup the permit the next day. $25 later, we have a piece of paper that says we can do it!
We picked up the King/Ashley 5500m Pellet Stove from our local TSC on sale. We also picked up the vent kit as well. This thing is a Beast! I'll post pictures of it tomorrow, after I have a few friends over to help get the darn thing out of my truck!
So, here we go!
Sep 13, 2011
Another update!
Crazy to think I haven't posted in MONTHS, and now I have two...but that's the case!
This update is better than the other one though...
We're Expecting baby #2!! Currently, the ETA is 4/5/2012, but we'll see if Baby Peterson 2.0 (BP2 for short) actually arrives on time...#1 showed up 10 days late.
Maybe we'll have to start pool to see who can guess the due date.
There wouldn't be any prize, but the satisfaction you were right.
This update is better than the other one though...
We're Expecting baby #2!! Currently, the ETA is 4/5/2012, but we'll see if Baby Peterson 2.0 (BP2 for short) actually arrives on time...#1 showed up 10 days late.
Maybe we'll have to start pool to see who can guess the due date.
There wouldn't be any prize, but the satisfaction you were right.
Goodbye Smartphone
I've decided to cancel my Smartphone plan and revert to a "feature" phone.
I'd love to say the main issue is the cost (Don't get me wrong, I like the idea of getting ~$30 a month back to spend on other things) but I think I would be lying..
I can't stand being always reachable by so many different methods.
Currently, I can be reached by:
So that brings me back to the immediate contact issue. If I dump my DroidX, that leaves me with two options instead of three...
I'd love to say the main issue is the cost (Don't get me wrong, I like the idea of getting ~$30 a month back to spend on other things) but I think I would be lying..
I can't stand being always reachable by so many different methods.
Currently, I can be reached by:
- Email on my DROIDX
- My Work provided Pager
- My Cellular phone number
- My On-call phone when I'm at work.
All of these, except for #4 are with me at work and at home.
Now, added in with those, let's take a look at other connected ways I can access information:
- Personal Windows Machine at home
- Work provided Laptop
- iPad
- cr-48
That's a total of 8 ways to access information/communicate with people at home/work. On a given day, I have 6 of them with me. At home, I have 7. SEVEN different ways to get in touch with me...
...Do I really need to be that accessible? AM I really that important? I'm going to with, Mostly.
I am responsible for several servers, and my team does have business hours on-call paging, but let's be realistic here: What I do is not "Patient Critical" or Super time sensitive. If there is an issue on the weekend, 9.9/10 times it can wait until Monday morning. I don't need to be constantly interrupted on the weekend by emails that can wait. If something comes up during the day, we get paged, not sent an email. If someone needs to reach me immediately, they either page or call my OCP/Cell.
If something goes wrong with a server, I do get pinged on it, but I could easily redirect those emails to my pager. If one of my servers/services goes down, it will most likely be a hardware issue, and my boss and his boss and I decided to have next business day for all parts, and for the "critical" pieces, we have support contracts that the vendors will be alerted by the servers themselves and they will come out and do the repairs with no interaction from me, other than to authorize their entrance to the data center.
So that brings me back to the immediate contact issue. If I dump my DroidX, that leaves me with two options instead of three...
To me, Two out of three Ain't Bad.
Jul 10, 2011
May 18, 2011
Apr 29, 2011
Well...that was fun!
Apparently one of my plug-ins decided to take down my blog.
That has since been fixed! Hooray for remembering MySQL Syntax!
That has since been fixed! Hooray for remembering MySQL Syntax!
Apr 3, 2011
Health Update for March 2011
it’s time for another update:
Weight on 2/28/2011: 164
Weight on 3/31/2011: 163
Weight Change : -1 pound! I've definitely lost a bunch of Fat Weight, and have been doing more strength training. I'm beginning to see definition in my arms, as well as my Legs. I can also see my abs!
Total Miles Run this Month: 97.15 Miles Another month of not missing a day! I walked to the Parking lot a few times, which adds another mile or so each way. Hopefully, the nice weather will allow me to do that more often and get even more exercise in.
Total Milage for 2011: 258.43 Miles …That’s a lot of miles! I've worn down my shoes enough that I have ordered a new pair!
Total Workout Minutes This month: 941 It is staggering to think that this monthly total surpasses the YEARLY amount I did 5 or 6 years ago...
Total Workout Minutes for 2011: 3,242
Total Calories burned from Working out: 11,186
All in all, I'm shocked and excited. I've come far in a short amount of time. I haven't felt this good in a long time, if ever!
The other amazing thing is how quickly "exercise" became "my morning routine." I used to have to make plans to go to the gym either during lunch or after work...that made it feel more like a job than what I see it for now: Fun.
Here's to another fantastic month! April weather will slowly warm up, which means not so many layers! I really LOVE running in the summer in the morning...I can't wait!
Weight on 2/28/2011: 164
Weight on 3/31/2011: 163
Weight Change : -1 pound! I've definitely lost a bunch of Fat Weight, and have been doing more strength training. I'm beginning to see definition in my arms, as well as my Legs. I can also see my abs!
Total Miles Run this Month: 97.15 Miles Another month of not missing a day! I walked to the Parking lot a few times, which adds another mile or so each way. Hopefully, the nice weather will allow me to do that more often and get even more exercise in.
Total Milage for 2011: 258.43 Miles …That’s a lot of miles! I've worn down my shoes enough that I have ordered a new pair!
Total Workout Minutes This month: 941 It is staggering to think that this monthly total surpasses the YEARLY amount I did 5 or 6 years ago...
Total Workout Minutes for 2011: 3,242
Total Calories burned from Working out: 11,186
All in all, I'm shocked and excited. I've come far in a short amount of time. I haven't felt this good in a long time, if ever!
The other amazing thing is how quickly "exercise" became "my morning routine." I used to have to make plans to go to the gym either during lunch or after work...that made it feel more like a job than what I see it for now: Fun.
Here's to another fantastic month! April weather will slowly warm up, which means not so many layers! I really LOVE running in the summer in the morning...I can't wait!
Mar 4, 2011
Bonus Health Update!
Well, I just had my physical...
And apparently I'm healthy!!
I had a health Screening back in January which said my Cholesterol was 231...not good! So I made a change or two to my diet, and Have been running 6 days a week since then.
The results:
Total Cholesterol: 192
LDL(Bad cholesterol): 109
HDL (Good Cholesterol): 73
Ratio: 2.5
These are awesome numbers!
Also, my resting heart rate is 54...Nice!
And apparently I'm healthy!!
I had a health Screening back in January which said my Cholesterol was 231...not good! So I made a change or two to my diet, and Have been running 6 days a week since then.
The results:
Total Cholesterol: 192
LDL(Bad cholesterol): 109
HDL (Good Cholesterol): 73
Ratio: 2.5
These are awesome numbers!
Also, my resting heart rate is 54...Nice!
Feb 28, 2011
Health Update for February
It’s time for another update:
Weight on 1/31/2011: 167
Weight on 2/28/2011: 164
Weight Change : -3 pounds! Not as much as last month, but I've included more fiber in my diet, and have been really trying to not be starving myself. I've pretty much lost my spare tire, but there's always room for improvement!
Total Miles Run this Month: 66.14 Miles
Total Milage for 2011: 127.23 Miles ...That's a lot of miles!
Total Workout Minutes This month: 728 I think I might have missed a day or two here...as it is way less than January...but the Milage seems right.
Total Workout Minutes for 2011: 1980
Total Calories burned from Working out: 8356
For the second month into this, I've definitely noticed a difference. By altering my eating habits, and including more Fiber and greens, my Calorie intake has leveled off, and that has helped keep my weight fairly constant.
I've also added some basic Strength training a couple days a week. Nothing too fancy, just some pushups, dips, and Plank(ing) to help improve the "T-Rex" arms as Robyn calls them ;)
All in all, Going well and I'm really enjoying it. I've slipped a few days as far as tracking my intake, but I think I've got it down to a fairly good science: I don't change up my eating too much and stay away from Sweets...I've really started paying attention to portions, and ensuring my "helping" of food really isn't four or five.
Here's to another good month!
Weight on 1/31/2011: 167
Weight on 2/28/2011: 164
Weight Change : -3 pounds! Not as much as last month, but I've included more fiber in my diet, and have been really trying to not be starving myself. I've pretty much lost my spare tire, but there's always room for improvement!
Total Miles Run this Month: 66.14 Miles
Total Milage for 2011: 127.23 Miles ...That's a lot of miles!
Total Workout Minutes This month: 728 I think I might have missed a day or two here...as it is way less than January...but the Milage seems right.
Total Workout Minutes for 2011: 1980
Total Calories burned from Working out: 8356
For the second month into this, I've definitely noticed a difference. By altering my eating habits, and including more Fiber and greens, my Calorie intake has leveled off, and that has helped keep my weight fairly constant.
I've also added some basic Strength training a couple days a week. Nothing too fancy, just some pushups, dips, and Plank(ing) to help improve the "T-Rex" arms as Robyn calls them ;)
All in all, Going well and I'm really enjoying it. I've slipped a few days as far as tracking my intake, but I think I've got it down to a fairly good science: I don't change up my eating too much and stay away from Sweets...I've really started paying attention to portions, and ensuring my "helping" of food really isn't four or five.
Here's to another good month!
Feb 27, 2011
Weekend Activities
This weekend has been pretty low key. After dealing with some "plumbing" emergencies the past couple of weeks (Base board heat pipe leak and shower engager break) I am happy to NOT have to play with Piping.
I took advantage of the calm and bottled the All-Grain IPA I brewed back in January. I was going to write up that experience, but...reference plumbing experiences referenced above.
I started by running the beer through cheese cloth to help snag any residual Crud. I discovered that there is a vast difference in cheese cloths: This one didn't seem to catch much. A test glass was very cloudy. After letting it rest in the Bottling bucket for a few minutes it seemed to clear up a bit, but I didn't have a good way to re-filter the beer again so I had to make due with what I had. I suppose I could have put some sort of filter on bottle bucket spout if I had more time or didn't have beer anxiously waiting for bottles. :)
I need to devise a good way (or find a pre-made solution) to filter beer. I'm thinking a two stage filter: A first stage that stops "large" crud from even leaving the carboy, and then the second stage that catches any smaller/fine crud before it enters the bottling bucket.
I already have the second stage, a funnel with Cheese cloth..I just need better Cheese cloth. For the first stage, I"m thinking a steel "balloon" that I can attach to my tubing. This would make it easy to clean/replace.
Now to find some decent cheese cloth..
I'm thinking I"m going to tackle a small water related project this weekend. I need to move our washing machine about three feet. Currently, it sits right in front of the Utility Sink in the Laundry space...this makes it really hard to use said utility Sink. To move it, I need to get slightly longer Water line tubing. I think I can handle this.
Well, Anya is asking for food, so I'm off to feed the baby!
I took advantage of the calm and bottled the All-Grain IPA I brewed back in January. I was going to write up that experience, but...reference plumbing experiences referenced above.
I started by running the beer through cheese cloth to help snag any residual Crud. I discovered that there is a vast difference in cheese cloths: This one didn't seem to catch much. A test glass was very cloudy. After letting it rest in the Bottling bucket for a few minutes it seemed to clear up a bit, but I didn't have a good way to re-filter the beer again so I had to make due with what I had. I suppose I could have put some sort of filter on bottle bucket spout if I had more time or didn't have beer anxiously waiting for bottles. :)
I need to devise a good way (or find a pre-made solution) to filter beer. I'm thinking a two stage filter: A first stage that stops "large" crud from even leaving the carboy, and then the second stage that catches any smaller/fine crud before it enters the bottling bucket.
I already have the second stage, a funnel with Cheese cloth..I just need better Cheese cloth. For the first stage, I"m thinking a steel "balloon" that I can attach to my tubing. This would make it easy to clean/replace.
Now to find some decent cheese cloth..
I'm thinking I"m going to tackle a small water related project this weekend. I need to move our washing machine about three feet. Currently, it sits right in front of the Utility Sink in the Laundry space...this makes it really hard to use said utility Sink. To move it, I need to get slightly longer Water line tubing. I think I can handle this.
Well, Anya is asking for food, so I'm off to feed the baby!
Feb 2, 2011
new fun!
Yesterday I came home from work to a surprise...
A cr-48 was delivered to me!!!
I was completely shocked when I opened the box, as I thought they either gave them all away or wasn't "googly" enough for it..
So far, I'm really liking it. I treat it like a netbook/iPad replacement, and it does well...in fact there are a few things it does better than the iPad ( and a few that I wished it did like the iPad)
I hope to try to get a "review" of it up, just to get me to really put it through its paces, and to help loosen the writing fear/block I have. The only way to get better is to practice, practice, practice....or something :)
But for now, off to see how it does with more multimedia type things!
A cr-48 was delivered to me!!!
I was completely shocked when I opened the box, as I thought they either gave them all away or wasn't "googly" enough for it..
So far, I'm really liking it. I treat it like a netbook/iPad replacement, and it does well...in fact there are a few things it does better than the iPad ( and a few that I wished it did like the iPad)
I hope to try to get a "review" of it up, just to get me to really put it through its paces, and to help loosen the writing fear/block I have. The only way to get better is to practice, practice, practice....or something :)
But for now, off to see how it does with more multimedia type things!
Jan 31, 2011
Health update!
I'm not sure who many people will care, but it's my blog damnit! So here are the updates from this month:
I've been using sparkpeople.com for about a month, and it's time for an update:
Weight on 1/1/2011: 178
Weight on 1/31/2011: 167
Weight Change : -11 pounds! (I think this might be a bit off...I'm not super confident in our scale, but I have definitely lost some spare tireage)
Total Miles Run: 61.09 Miles
Total Workout Minutes This month: 1252
Total Calories burned from Working out: 8315
All in all, I've felt good! Tracking my eating has shown me that there are days that I do not eat enough...So I'm working on incorporating more nuts and greens to help bring up the Calorie count, yet not adding too much in the way of Cholesterol or anything.
All in all, Going well!
I've been using sparkpeople.com for about a month, and it's time for an update:
Weight on 1/1/2011: 178
Weight on 1/31/2011: 167
Weight Change : -11 pounds! (I think this might be a bit off...I'm not super confident in our scale, but I have definitely lost some spare tireage)
Total Miles Run: 61.09 Miles
Total Workout Minutes This month: 1252
Total Calories burned from Working out: 8315
All in all, I've felt good! Tracking my eating has shown me that there are days that I do not eat enough...So I'm working on incorporating more nuts and greens to help bring up the Calorie count, yet not adding too much in the way of Cholesterol or anything.
All in all, Going well!
Jan 24, 2011
Weekend House Projects 2
Well another weekend, another few projects done!
Saturday found me lurking in the garage trying to organize the "gift" the previous owners left us: a loft filled with random wood scraps. I pulled it all down, and sorted it into keep and throw piles. While sorting, I discovered a full box of the flooring they used in the kitchen! This could come in handy...I stacked the wood up in the loft, and managed to put Robyn's Tires and our non-sleeping camping supplies up there along with the Chairs I need to fix (which I think I can with some of the gifted wood!!) at some point. I then threw away the broken baby swing they also left behind. After all this work, I then began trying to see if I could fit both vehicles in the garage AND still be able to pull the snow blower out....turns out I can! There is just enough room at the front of the garage to park the snow blower between the vehicles and be able to open the doors without hitting anything! I'll admit, it kind of felt like a losing game of Tetris for a bit...but then finally getting the long piece needed! I have some finishing touches (like hanging the bikes on the wall to free up the front right corner) but for this coming brewing weekend, We'll have plenty of room!
I then moved on to our bed that needs some more bolts to complete it. I found that the bolts are hard to find! The original bolts are 2 1/4" in length, while the closest I could find at Lowes was either 2" or 2 1/2". I decided to go with the 2 1/2" screws. I used them to secure the head/base boards to the frame, and utilize the original bolts for the canopy. I ended up using one of the new screws in the canopy, and it fit nicely.
The next project I tackled was the mirror on Robyn's Dresser. The mirror was not put on when we moved because one of the support wood blocks had split at some point and time. I decided to use some of the scrap wood I organized from the garage to replace it. I measured the good block and set off sawing, chiseling and sanding the block until it was as close to the original as I could get it. IT wasn't a clean piece, but it was usable!
I drilled the holes for the screws/bolts and secured it to the back of the dresser. Low and behold! The mirror was supported! I tightened down the bolts, and angled the mirror so it rested against the wall to give it a little more support.
After that, I consulted with Robyn about our Dryer Dilemma: Our Current dryer vents out the opposite side of the house with a 50 foot run with about 7 90 degree turns...This might be one reason why things never dry!
We talked about it, and decided that the best answer would be to move the dryer to the pantry, so that way the dry run is about 2 feet. I took a look at our current dryer electric line, and realized I could safely disconnect power, and thread it through our closet into the pantry. This will require drilling two holes, but I think it is doable. After that, I can use a standard wall dryer venting kit, and should be all set!
All in all, another successful weekend! This coming weekend will be brewing weekend, so probably no project updates, but who knows? Maybe Sunday I'll feel like drilling test holes...
Saturday found me lurking in the garage trying to organize the "gift" the previous owners left us: a loft filled with random wood scraps. I pulled it all down, and sorted it into keep and throw piles. While sorting, I discovered a full box of the flooring they used in the kitchen! This could come in handy...I stacked the wood up in the loft, and managed to put Robyn's Tires and our non-sleeping camping supplies up there along with the Chairs I need to fix (which I think I can with some of the gifted wood!!) at some point. I then threw away the broken baby swing they also left behind. After all this work, I then began trying to see if I could fit both vehicles in the garage AND still be able to pull the snow blower out....turns out I can! There is just enough room at the front of the garage to park the snow blower between the vehicles and be able to open the doors without hitting anything! I'll admit, it kind of felt like a losing game of Tetris for a bit...but then finally getting the long piece needed! I have some finishing touches (like hanging the bikes on the wall to free up the front right corner) but for this coming brewing weekend, We'll have plenty of room!
I then moved on to our bed that needs some more bolts to complete it. I found that the bolts are hard to find! The original bolts are 2 1/4" in length, while the closest I could find at Lowes was either 2" or 2 1/2". I decided to go with the 2 1/2" screws. I used them to secure the head/base boards to the frame, and utilize the original bolts for the canopy. I ended up using one of the new screws in the canopy, and it fit nicely.
The next project I tackled was the mirror on Robyn's Dresser. The mirror was not put on when we moved because one of the support wood blocks had split at some point and time. I decided to use some of the scrap wood I organized from the garage to replace it. I measured the good block and set off sawing, chiseling and sanding the block until it was as close to the original as I could get it. IT wasn't a clean piece, but it was usable!
I drilled the holes for the screws/bolts and secured it to the back of the dresser. Low and behold! The mirror was supported! I tightened down the bolts, and angled the mirror so it rested against the wall to give it a little more support.
After that, I consulted with Robyn about our Dryer Dilemma: Our Current dryer vents out the opposite side of the house with a 50 foot run with about 7 90 degree turns...This might be one reason why things never dry!
We talked about it, and decided that the best answer would be to move the dryer to the pantry, so that way the dry run is about 2 feet. I took a look at our current dryer electric line, and realized I could safely disconnect power, and thread it through our closet into the pantry. This will require drilling two holes, but I think it is doable. After that, I can use a standard wall dryer venting kit, and should be all set!
All in all, another successful weekend! This coming weekend will be brewing weekend, so probably no project updates, but who knows? Maybe Sunday I'll feel like drilling test holes...
Jan 10, 2011
Spark People
I decided to do a better job of tracking my health this year (I guess it's a resolution). I joined the site SparkPeople.com as a way to track my activities.
If you want to follow along, go here!
http://www.sparkpeople.com/mypage.asp?id=mpeterson221
If you want to follow along, go here!
http://www.sparkpeople.com/mypage.asp?id=mpeterson221
Weekend House Projects
Well, after the fun of the Boiler last week, I decided to keep our house projects to a dull roar. I mean, as much fun as it would be to start tearing down walls, or installing new lights, you kinda need capital for that, and the boiler sucked most of that dry, like are nice WARM air! (Heat is a great invention :) )
The original plan was to put plastic on the windows, to help cut down on the drafts. Notice the use of the words "original" and "was" in that sentence. Those priorities soon changed. Friday night, as I prepared for bed a new, more pressing matter came up:
The Toilet handle.
Through the use of my sheer manly strength, I managed to snap the mighty plastic handle at the joint where it meets the resistant plastic handle the lifts the rubber stopper in the water tank. My original idea was to replace the entire tank mechanism, until Robyn pointed out that the toilet works, just the handle is broken. I wasn't if Lowes/Home Depot would carry such an exotic product like that...but we took a gamble.
Who knew they sold just toilet handles! :) And the amazing thing is: Handles are WAAAY cheaper than the entire kit! Crazy!
So, after finding that, I was feeling good. So good in fact, we took another gamble that there may be a replacement drain for our tub. The tub used to have one of those Push down drains that doesn't have a strainer. Notice the use of the phrase "used to." That's right! We replaced the push down with a strainer AND a rubber stopper! After two Anya Tubbers, it appears to be holding up fairly well. No leaking, and the strainer is catching hair and debris (chucks of soap mostly) that normally would just go down the drain and potentially cause a problem later on.
I was feeling really good at this point. So good in fact, I went down to the basement and grabbed the storm window for the kitchen window that never go put on for some reason. I set it in place, tightened the screws, and marveled at...well me!
We also managed to de-christmas tree the house (which involved a lot of needle sucking/sweeping) and put the canopy posts back on our bed. We're short a few screws, but I took measurements and plan to pick some up this weekend, along with the raw materials to fix the mirror on our Dresser. One of the wood supports has split, and I plan on replacing it with all new pieces. Robyn and I also started planning for the big bathroom re-do that will hopefully come to fruition sometime later this summer/fall.
All in all, a fairly successful Home repair weekend...granted they were all small, but baby steps people, baby steps.
The original plan was to put plastic on the windows, to help cut down on the drafts. Notice the use of the words "original" and "was" in that sentence. Those priorities soon changed. Friday night, as I prepared for bed a new, more pressing matter came up:
The Toilet handle.
Through the use of my sheer manly strength, I managed to snap the mighty plastic handle at the joint where it meets the resistant plastic handle the lifts the rubber stopper in the water tank. My original idea was to replace the entire tank mechanism, until Robyn pointed out that the toilet works, just the handle is broken. I wasn't if Lowes/Home Depot would carry such an exotic product like that...but we took a gamble.
Who knew they sold just toilet handles! :) And the amazing thing is: Handles are WAAAY cheaper than the entire kit! Crazy!
So, after finding that, I was feeling good. So good in fact, we took another gamble that there may be a replacement drain for our tub. The tub used to have one of those Push down drains that doesn't have a strainer. Notice the use of the phrase "used to." That's right! We replaced the push down with a strainer AND a rubber stopper! After two Anya Tubbers, it appears to be holding up fairly well. No leaking, and the strainer is catching hair and debris (chucks of soap mostly) that normally would just go down the drain and potentially cause a problem later on.
I was feeling really good at this point. So good in fact, I went down to the basement and grabbed the storm window for the kitchen window that never go put on for some reason. I set it in place, tightened the screws, and marveled at...well me!
We also managed to de-christmas tree the house (which involved a lot of needle sucking/sweeping) and put the canopy posts back on our bed. We're short a few screws, but I took measurements and plan to pick some up this weekend, along with the raw materials to fix the mirror on our Dresser. One of the wood supports has split, and I plan on replacing it with all new pieces. Robyn and I also started planning for the big bathroom re-do that will hopefully come to fruition sometime later this summer/fall.
All in all, a fairly successful Home repair weekend...granted they were all small, but baby steps people, baby steps.
Jan 5, 2011
Home adventures!
In my previous post, I mentioned I wanted to write about the adventures of owning a home and the projects I will be working on. I had no idea the first project would require an entry so fast!
Yesterday, I get a call from Robyn saying the house is cold. Our house is heated by Baseboard water heaters with a fuel oil boiler. I figure it must have tripped a breaker or just needed to be reset. I had her go down and check it out. Unfortunately, it wasn't that. Her dad stopped over to take a look, and said the pilot light wasn't on and it appeared to be dead. Hmm...this can't be good. I really don't have a real firm grip on how the boiler system works, so I was out of my element for sure.
I did what any Semi-handy guy would do: I freaked out and called a professional. Little did I know how much fun that would be!
I learned very quickly that to work on Fuel Oil Systems, you need to be certified...and not many people are. I also learned the two big heating companies in the area are not, which filled me with such....dread that I was out of heat until I spent thousands of dollars (which I don't have). Thankfully, our oil company had a recommendation for a company and they agreed to come out and take a look (at after hours pricing of couse!).
Well, I'll bore you with the details, but suffice to say I learned a lot about Fuel oil and boilers last night. I also learned the "cleaning" we required before purchasing was just that: A cleaning that was apparently blind to nagging issues. Freaking great! But now, we have the correct size nozzle and a new relay, which wasn't as bad as I expected...but still a nice punch in the gut.
At least we have heat!
Yesterday, I get a call from Robyn saying the house is cold. Our house is heated by Baseboard water heaters with a fuel oil boiler. I figure it must have tripped a breaker or just needed to be reset. I had her go down and check it out. Unfortunately, it wasn't that. Her dad stopped over to take a look, and said the pilot light wasn't on and it appeared to be dead. Hmm...this can't be good. I really don't have a real firm grip on how the boiler system works, so I was out of my element for sure.
I did what any Semi-handy guy would do: I freaked out and called a professional. Little did I know how much fun that would be!
I learned very quickly that to work on Fuel Oil Systems, you need to be certified...and not many people are. I also learned the two big heating companies in the area are not, which filled me with such....dread that I was out of heat until I spent thousands of dollars (which I don't have). Thankfully, our oil company had a recommendation for a company and they agreed to come out and take a look (at after hours pricing of couse!).
Well, I'll bore you with the details, but suffice to say I learned a lot about Fuel oil and boilers last night. I also learned the "cleaning" we required before purchasing was just that: A cleaning that was apparently blind to nagging issues. Freaking great! But now, we have the correct size nozzle and a new relay, which wasn't as bad as I expected...but still a nice punch in the gut.
At least we have heat!
Jan 1, 2011
Happy new year!!
This year, I will blog about bread and beer more and also my various home remodeling/upgrades
Dec 12, 2010
Dec 5, 2010
Nov 25, 2010
Nov 5, 2010
Slowly but surely...
We are marching towards indebtedness Homeownership!!
Got the final ok from the mortgage company and the lawyers. Closing date confirmed!
Got the final ok from the mortgage company and the lawyers. Closing date confirmed!
Oct 30, 2010
Oct 23, 2010
Oct 9, 2010
Oct 8, 2010
Mental block
Some mornings, I have mental block about bringing my lunch...I wish I knew why. Do I secrectly not like my lunch? No, I actually love my new lunch routine.
Best part? Everyone un my team brought their lunch today.
Oct 5, 2010
This is an interesting phone...
DroidBerry Phone!!
http://www.engadget.com/2010/10/05/motorola-droid-pro-first-hands-on/
I might have rethought my X purchase if this was out when I was looking for a new phone.
http://www.engadget.com/2010/10/05/motorola-droid-pro-first-hands-on/
I might have rethought my X purchase if this was out when I was looking for a new phone.
Oct 4, 2010
This week's lunch
So I've given up on deli meats and sub rolls for lunch. I wanted more greens in my diet, and the thought of just adding lettuce did not sit well with me. This week, I decided to take Brussels sprouts, onions, garlic, ground Mexican Chiles, a dash of Cumin, and chicken and sauté them up in a little bit of EVOO (Thanks Rachel Ray!).
I think it came out pretty good! I put it on a bed of brown rice and call it a meal!
For snacking, I've got mixed nuts, raisins, coffee, and water. I think it is a bit healthier than white bread, deli meat, cheese, and yogurt.
I think it came out pretty good! I put it on a bed of brown rice and call it a meal!
For snacking, I've got mixed nuts, raisins, coffee, and water. I think it is a bit healthier than white bread, deli meat, cheese, and yogurt.
Oct 3, 2010
Dinner for sunday
Tonight it was cider brined porkchops with apple onion cider glaze and cranberry sauce. For sides we had homemade italian bread (from a biga starter) and rosemary oven roasted seasonal vegetables.
All on all, a delicious supper!
Pictures were an afterthought. I will remember next time!
Oct 2, 2010
Sep 29, 2010
Not so fast!!
Well, it looks like there's a holdup.
The radon came back too high and will need to be remedied before we move on.
Sep 28, 2010
House passed inspection!
Well, the house Robyn and I placed an offer on and was accepted has passed the home inspection! The 160 year old house is in remarkable shape, and no major projects are looming over head. Now we wait for the radon test to come back, and hopefully then we can continue on the road to owing a lot of money home ownership!
Sep 25, 2010
Sep 24, 2010
Sep 11, 2010
Sep 5, 2010
Aug 30, 2010
Aug 28, 2010
Aug 22, 2010
New Phone Mark!
So I haven't updated in awhile, but I thought I would pass along some (techy geeky) exciting news!
I have broken up with my Storm 9530, and have picked up a Droid X!
I ordered it on Launch day, and got it a few days later. So far...I love it.
While I got used to the quirkiness of the Storm, I was noticing the annoyances that finally got me to pull the trigger on a new phone:
I'll write more later, but now I'm getting tired from driving back from Albany in the crazy rain!
I have broken up with my Storm 9530, and have picked up a Droid X!
I ordered it on Launch day, and got it a few days later. So far...I love it.
While I got used to the quirkiness of the Storm, I was noticing the annoyances that finally got me to pull the trigger on a new phone:
- Not being able to load up more than 5 apps in the shared RAM/app storage memory.
- Not having Wi-Fi for those times when I'm not in a good data range, like half the areas in URMC.
- Not having good Exchange support OUTSIDE of using BES.
I'll write more later, but now I'm getting tired from driving back from Albany in the crazy rain!
Jul 26, 2010
Jul 25, 2010
Latest Loaf
Here's a look at my latest loaf. It is a celebration challah loaf that I put together last night. I am calling it leaning manny loaf.
I am really thinking about starting the challenge back up, but right now I don't have the time to be baking all weekend. Maybe I'll modify it so i am only making corn and dairy free instead of that plus the exact recipe. We'll see.
Jun 26, 2010
What's Proofing
Here's a quick look at what's on the schedule for tomorrow's baking:
It seems like a lot, but I should be able to knock the four loaves of bread (Sunday/Daily) at once, and the pizza dough will take about 15 minutes, and then into the fridge it goes! The scones will be interesting, as it will be my first attempt at them...I think they'll be tasty!
I still need to figure out what to do with the giant bag of frozen cherries in my fridge...suggestions?
- Sunday dinner bread (Biga prepped)
- Biga for Daily bread (Biga prepped)
- Pizza dough for calzones
- Cranberry scones
It seems like a lot, but I should be able to knock the four loaves of bread (Sunday/Daily) at once, and the pizza dough will take about 15 minutes, and then into the fridge it goes! The scones will be interesting, as it will be my first attempt at them...I think they'll be tasty!
I still need to figure out what to do with the giant bag of frozen cherries in my fridge...suggestions?
Jun 23, 2010
Baking Update
I know it has been quite some time since I updated with baking news, but I wanted to let all (three?) of you know, I BAKED this past weekend!
I ended up making some Italian bread (using a Biga) and some Cherry turnovers on Father's Day. (Hey, some dads want to relax and have a cold one, while I prefer making it nice and hot in the kitchen first).
I think both came out fairly tasty.
I think I'm going to tackle scones and sandwich bread this weekend...as I am craving one and needing the other.
I ended up making some Italian bread (using a Biga) and some Cherry turnovers on Father's Day. (Hey, some dads want to relax and have a cold one, while I prefer making it nice and hot in the kitchen first).
I think both came out fairly tasty.
I think I'm going to tackle scones and sandwich bread this weekend...as I am craving one and needing the other.
Jun 14, 2010
Move successful!
So we survived the move! We are slowly adjusting to life back in our hometown. It is weird to se many things that I remember growing up either surrounded by new buildings or just missing.
The stress of the new job and getting used to the new place has me a bit on edge. I'm hopping that in time, it will get better. I baked a few loaves of weekly bread on sunday and that was good. I plan on researching a new brew that I hope to start next week.
Here's to making a new brew and continuing the BBA challenge!
The stress of the new job and getting used to the new place has me a bit on edge. I'm hopping that in time, it will get better. I baked a few loaves of weekly bread on sunday and that was good. I plan on researching a new brew that I hope to start next week.
Here's to making a new brew and continuing the BBA challenge!
May 12, 2010
lack of posts
Well, as you may have noticed, there has been a significant lack of posts lately. I assure you, there is a good reason...
I got a new job! This new job is in my old stomping grounds, which means I need to move! We've been furiously packing and getting ready for move day (friday/saturday). Next week, in the chaos of unpacking, I'll try to get some updates in.
See you on the other side!
I got a new job! This new job is in my old stomping grounds, which means I need to move! We've been furiously packing and getting ready for move day (friday/saturday). Next week, in the chaos of unpacking, I'll try to get some updates in.
See you on the other side!
Apr 17, 2010
Back to norm next week?
With Easter and a bunch of work and other thing popping up, I haven't been able to get blogging bumped up in the prioirity list. Hopefully after this weeken things will return to normal.
I will also comment on the htc incredible....dreamy!
I will also comment on the htc incredible....dreamy!
Apr 9, 2010
Crazy week!
This week has been non stop fun. Lots of work "things" happening, trying to recover from Easter weekend makes for a tiring week.
I had a really great time at my Mom's for Easter. I actually ended up baking a challenge bread without really meaning to, so I'll get that written up tomorrow (I hope).
The plan for this weekend: Get a new Bed!
I had a really great time at my Mom's for Easter. I actually ended up baking a challenge bread without really meaning to, so I'll get that written up tomorrow (I hope).
The plan for this weekend: Get a new Bed!
Apr 2, 2010
No challenge this week
Howdy Bread lovers!
There won't be a challenge this week, as I will be out of town for Easter Fun! I will still be making bread, but not in a challenge-y way.
I will be making Lambropsomo, Lefse, and hopefully dinner rolls. I will get some pictures and post them..as long as the loaves turn out ok :)
I made the list up BEFORE I checked the weather forecast. Thankfully, most of the breads take a few hours to proof, which means I'll be able to spend some time with family outside, and make delicious foods for our easter dinner.
See you next week!
There won't be a challenge this week, as I will be out of town for Easter Fun! I will still be making bread, but not in a challenge-y way.
I will be making Lambropsomo, Lefse, and hopefully dinner rolls. I will get some pictures and post them..as long as the loaves turn out ok :)
I made the list up BEFORE I checked the weather forecast. Thankfully, most of the breads take a few hours to proof, which means I'll be able to spend some time with family outside, and make delicious foods for our easter dinner.
See you next week!
Mar 29, 2010
BBA Challenge Round 8: Cinnamon Raisin Walnut Bread
The Challenge Bread
[caption id="" align="alignnone" width="500" caption="Mmm...Delicious bread of nutty raisin-y goodness"]
[/caption]This week, we're making Cinnamon Raisin Walnut Bread!
Round 8 is done!
Well I finished up the Cinnamon Raisin Walnut Bread on Sunday, and I'll get the post up later this week.
I think I might slow it down a bit, as baking a challenge loaf every weeks means I don't get a chance to make "normal" bread. I'll still try to post once a week, but I'll probably start talking about the challenges I'm facing (bread not rising as well as it used to) and how I plan to attack them (check yeast, ensure good kneading).
Hopefully, this blog will not only talk about what I'm doing with bread baking, but about baking in general and how to fit it in to a busy lifestyle.
Bread on!
I think I might slow it down a bit, as baking a challenge loaf every weeks means I don't get a chance to make "normal" bread. I'll still try to post once a week, but I'll probably start talking about the challenges I'm facing (bread not rising as well as it used to) and how I plan to attack them (check yeast, ensure good kneading).
Hopefully, this blog will not only talk about what I'm doing with bread baking, but about baking in general and how to fit it in to a busy lifestyle.
Bread on!
Mar 21, 2010
BBA Challenge Round 7: Cinnamon Rolls
Mar 16, 2010
BBA Challenge Round 6: Ciabatta
The Challenge Bread
This week, we're making Ciabatta.
A Little History
I first remember having Ciabatta about eight years ago, when I ordered a sandwich and they asked me if I wanted it on Ciabatta...not knowing what it was I just agreed that is sounded good. It is now one of my favorite breads to eat (and now make!)
The Ingredients
I went with the Poolish version of this recipe, as I haven't really made anything with a poolish yet:
- Poolish
- Bread Flous
- Water
- Yeast
- Bread Flour
- Salt
- yeast
- Water
Corn/Dairy Free changes
Since this a Primary loaf, there isn't much to it, hence no corn or dairy. The taste and character comes from the baking.
The Shaping
The night before the baking, I made up the poolish and let it ferment in the fridge overnight. This allows the yeast more time to break down the flour into delicious gluten. The next day, I combined the ingredients with the poolish. The dough is very wet and can be hard to work with. The wetter, the harder, but the bigger the air pocket are.
Once I was done kneading the dough, I transferred it to the Generously floured counter. I shaped the dough into a rough rectangle. I then sprinkled another generous portion of flour on top of the loaf. Then, grabbing opposite ends of the dough, I picked it up, and let it stretch to about twice the original size. I placed it back down on the counter, and folded it up like a letter. I lightly misted it with oil, covered it in plastic, and let it rest for 30 minutes. I then did another stretching session.
After the stretching, I took a heavy Towel and setup a couche: a floured towel used to create crusty breads. I let the loaves proof until they had "noticeably swelled."
The Baking
I preheated the oven to 500 degrees. I put a cookie sheet on the topmost oven rack, while moving the other rack to the lowest setting. Once the oven was up to temp, I put a cup of hot water into the steam pan, and put the loaves on the lowest rack. After 30 seconds, I opened the oven, and sprayed the sides with water to generate more steam. I did this twice more at 30 second intervals, and then turned the oven down to 450 degrees. I baked the loaves for 10 minutes, and then rotated them 180 degrees and continued to bake them until they reached an internal temperature of 205. I then placed them on a cooling rack for about an hour.
Results and My Final Thoughts/Notes
The end result was good. The crust was fairly crusty, but not too hard. I didn't get as big of air pockets as I wanted, but they were pretty good.
Again, I think one of the main things I learned this week would be timing. I think I let the dough sit more than 30 minutes, as it kind of swelled out and almost off the pan! Then, I think I over compensated and didn't let the loaves proof long enough on the couche.
As the saying goes, there's no bad homemade bread....unless it burnt.
Up Next…
Next week, we're making Cinnamon Rolls!
Comments? Suggestions?
So what do you think? Sound good? Anything I should change/do better?
Mar 15, 2010
First BBA fail!
I had my first fail this weekend with regards to the challenge! This weekend I was attempting to make ciabatta and bought yeast since I was up in Rochester for the weekend. I left the loaf in the sun for a couple of hours to let it rise. I came back and reized the loaf had not changed shape or size.
So here's my tip of the week: check the date on your yeast BEFORE you start baking.
I'll be making a second attempt this weekend to NOT h e a fail.
Stay tuned!!
So here's my tip of the week: check the date on your yeast BEFORE you start baking.
I'll be making a second attempt this weekend to NOT h e a fail.
Stay tuned!!
Mar 13, 2010
BBA Challenge Round 5: Challah
The Challenge Bread
This week, we're making Challah.
A Little History
Challah is a Jewish celebration bread. It is braided and sometimes a braid will be placed on top of a larger braid for a big celebration loaf.
The Ingredients
This one is pretty straight forward:
- Bread Flour
- sugar
- Salf
- yeast
- Vegetable oil
- whole eggs
- egg yolks
- Water
Make sure to save the egg whites to use as an egg wash later on. I just put them in a bowl and covered it with plastic wrap and put it in the refrigerator while I prepped the loaves.
Corn/Dairy Free changes
There are no diary or corn ingredients in this bread. No changes!
The Shaping
This is the first loaf that has required "real" shaping. On the first non Giant celebration loaf, I took the dough and split it into three equal pieces. This is where the scale was handy: Just because two pieces looked about the same, they often weren't. I took the pieces, and shaped them into Boules, and let them rest for ten minutes under a towel.
After the mandatory rest period, I began shaping them into nice, long ropes of dough. I started by rolling them on the table, slowly pushing them out from the center of the dough mass. I that mostly worked, but I experimented with other methods as well. I tried holding the dough "upright" and rubbing my hands like I was trying to warm them up, letting gravity pull the dough down. That didn't work as well as the horizontal roll, but it wasn't bad. The last method I tried was holding the dough with my hands at nine and three o'clock and slowly shaking the dough like you to a vending machine trying to get your stuck Doritos to fall. While shaking, I slowly pulled the dough out, eventually ending up with my hands about three to four feet apart. That seemed to be the best method on that day.
After I had three equal length ropes, I began my braiding from the center of soon-to-be loaf. I braided down until I couldn't effectively make more cross over manuvers. I then rotated the loaf and did it to the other side. When I flipped the loaf, I needed to invert my braiding method: instead of taking the rope on the left and brining it over the top of the middle rope on its way to the right side, I needed to put it under the middle rope to keep the braid looking neat and not end up with a funky bump in the middle. It took my brain a couple of attempts before I finally got it right. I think it ended up looking pretty good for my first attempt.
The Celebration was very similar, but instead of one braid there were two: one on top that was half the size of the bottom loaf. I did this by taking the dough and cutting it into three equal pieces and then combining two of those pieces. I then took both lumps and cut them into three dough balls to make a total of six dough ropes. I formed the bottom braid and put the smaller one on top and gave it just a little pinch to keep it from falling off.
I then gave the loaf a quick egg white wash, and let them proof under plastic wrap for about 2 hours, or until the loaf just about doubled in size. I then gave the loaf another quick wash and let it rise until it was double the original size.
The Baking
I preheated the oven to 325 degrees. I baked the loaves for about 45 minutes, until the internal temperature of the loaves reached 190 degrees. The crust also turned a nice golden brown. The curst wa
Results and My Final Thoughts/Notes
I really liked making the Challah. Even though my shaping skills are not up to the level I would like them to be, I think I will be adding this into the normal rotation of breads. It serves as a nice break from my "basic" loaves, and gives me a chance to try making "arts-y" bread.
Up Next…
Next week, we'll be tackling Ciabatta on the road!
Comments? Suggestions?
So what do you think? Sound good? Do you have any butter/milk replacements that I should try?
Holy Missing Post!
Alright.
I admit I've fallen behind on my BBA Challenge post. I have started the Challah entry, but this week got away from me. I've been working on Anya's Site, which is still not quite ready, but I promise: Today you will have your Challah post!
Ciabatta is coming along alright...I think ;)
I admit I've fallen behind on my BBA Challenge post. I have started the Challah entry, but this week got away from me. I've been working on Anya's Site, which is still not quite ready, but I promise: Today you will have your Challah post!
Ciabatta is coming along alright...I think ;)
Mar 7, 2010
Challah is done
I managed to get the Challah finished yesterday. There wasn't any overnight Fermenting going on, so it came together pretty quickly.
I'll give you a sneak peak at the post: There's half a loaf left!
I'll give you a sneak peak at the post: There's half a loaf left!
Mar 2, 2010
Nut Brown Update
I took the Nut Brown and transferred it to the 5 gallon Glass carboy on Sunday. It was in there for about 8-9 days before the primary fermentation settled down. While I was transferring the brew, I caught a hint of the hops...and I am happy to report that this will not be a super hoppy beer! Hooray for not using the same hops every single time!
BBA Challenge Round 4: Brioche
The Challenge Bread
This week, we're making Brioche: Rich Man's Style!
Feb 26, 2010
BBA Challenge Round 3: Artos: Christopsomos
The Challenge Bread
This week I tackled Artos which is greek celebration bread. I chose the first variation which is Christopsomos.
Feb 21, 2010
Winter Nut Brown Ale!
Along with the BBA challenge this weekend, I also took it upon myself to brew another beer. This time up: Nut Brown Ale. I went with nut brown to brew something that isn't a stout. The hops that is called for were very low on the Alpha Acid level, which hopefully means the strong Hop taste that has been overtaking my brews won't be as present.
I'll also get this written up this week, so look out for more posts!
I'll also get this written up this week, so look out for more posts!
BBA Challenge Round three is done!
Well I just took Round three out of the oven. We'll see how it is tomrorow!
Quick thoughts:
That's it for now! I'll get the post and hopefully some pictures up shortly!
Quick thoughts:
- It's a little darker than I would like, but not burnt.
- The smell is amazing. This is my first time baking that I really had a hard time not "sampling" as soon as it came out.
- Always check your Parchment paper supply BEFORE shaping your loaves.
That's it for now! I'll get the post and hopefully some pictures up shortly!
Feb 17, 2010
The BlackBerry saga
Here's the saga of my former smartphone, the blackberry 9530. It is not a pretty tale and it involves money, reboots, missing apps, and a lot of swearing.
It all started when my screen started acting up. My screen would occasionally not recognize a tap or a press. At first, I thought it was a mistake I made: my hand was too cold, I pushed too quickly, or some other crazy sounding thing. I would attempt to click on the PodTrapper Icon and get nothing…It didn’t happen frequently enough to warrant sending the unit in for repair, just enough to keep the embers of irritation glowing. I do seem to have a slight calibration issue. It is definitely an issue that has cropped up overtime. While that is an annoyance, the bigger problem is stability.
The one thing I love about the BlackBerry platform over other platforms is the openness. I am not reliant on one company to bless, anoint, or whatever religious analogy you care to use an application. Granted, there are pros and cons to both styles of thinking.
On the Open-Plus side, I can run whatever I want. IF want to search for an app that will replace the included apps, such as a replacement web browser, or email application, I can. As of right now, the only web browser that is available for the iPhone OS is Mobile Safari. Yes, Opera is working on the Opera Mini browser, but it hasn’t been submitted for approval yet. On the Non-Open-Plus side, I know the apps that have been approved work. I haven’t really seen an iPhone/iPod Touch app crash that wasn’t related to the app requiring a data connection, and said connection leaving without leaving a note. I’ve had a couple of bomb outs on my iPod Touch, but it always brings me right back to the home screen. I’m getting on an apple rant, so let’s look a the downside of Open-Apps.
On the Open-Minus side, I can run whatever I want. Since the code isn’t tested by RIM for Operability, You can get some pretty bad apps that crash. on my BlackBerry, I currently have about 14 apps. I don’t keep them all running all the time…mostly because the Storm 9530 has a small application memory size. I am getting a message about once every two days on my storm saying it is out of application memory, and that to remedy this, I should delete some apps. Seriously? why is my application memory so small? I have an 8 gig SD card in there that is 75% free? Can’t I dedicate some of that to applications? Granted, I am frustrated by this, but I think this gives way to the penultimate reason…
I really am. I agonized for over a year about getting a smartphone. I was practically drooling when they announced the Moto Q back in May of 2006. I eyed that baby for a long time. It wasn’t until the close of 2007 that I finally took the plunge and picked it up. It took me another 6 months before I finally got a data plan to really use the thing for more than a glorified calculator. I held onto that thing until February 2009 when I got the Storm. I really loved it! At the time, I could justify the $29.99 a month, as money was a bit more freely flowing with both my wife and I working. With the birth of my Daughter Anya in December, it really made me rethink my Mobile Priorities.
Don’t get me wrong, I still really like the storm! SmartPhones in general are still my go-to Gadget dream scenarios. I can just think of a better thing to spend the money on. I’m sure I will venture into the SmartPhone arena again, but for now, I’m experimenting to see how I do without 24/7 Internets.
Does that mean I’m completely happy NOT connected 24/7? No, but I still get all the stuff I want out of my iPod Touch that is on loan. The question is, when I have to give up the touch…will I get my own?
The Issue
It all started when my screen started acting up. My screen would occasionally not recognize a tap or a press. At first, I thought it was a mistake I made: my hand was too cold, I pushed too quickly, or some other crazy sounding thing. I would attempt to click on the PodTrapper Icon and get nothing…It didn’t happen frequently enough to warrant sending the unit in for repair, just enough to keep the embers of irritation glowing. I do seem to have a slight calibration issue. It is definitely an issue that has cropped up overtime. While that is an annoyance, the bigger problem is stability.
The App Problem
The one thing I love about the BlackBerry platform over other platforms is the openness. I am not reliant on one company to bless, anoint, or whatever religious analogy you care to use an application. Granted, there are pros and cons to both styles of thinking.
On the Open-Plus side, I can run whatever I want. IF want to search for an app that will replace the included apps, such as a replacement web browser, or email application, I can. As of right now, the only web browser that is available for the iPhone OS is Mobile Safari. Yes, Opera is working on the Opera Mini browser, but it hasn’t been submitted for approval yet. On the Non-Open-Plus side, I know the apps that have been approved work. I haven’t really seen an iPhone/iPod Touch app crash that wasn’t related to the app requiring a data connection, and said connection leaving without leaving a note. I’ve had a couple of bomb outs on my iPod Touch, but it always brings me right back to the home screen. I’m getting on an apple rant, so let’s look a the downside of Open-Apps.
On the Open-Minus side, I can run whatever I want. Since the code isn’t tested by RIM for Operability, You can get some pretty bad apps that crash. on my BlackBerry, I currently have about 14 apps. I don’t keep them all running all the time…mostly because the Storm 9530 has a small application memory size. I am getting a message about once every two days on my storm saying it is out of application memory, and that to remedy this, I should delete some apps. Seriously? why is my application memory so small? I have an 8 gig SD card in there that is 75% free? Can’t I dedicate some of that to applications? Granted, I am frustrated by this, but I think this gives way to the penultimate reason…
I am a Cheap Geek
I really am. I agonized for over a year about getting a smartphone. I was practically drooling when they announced the Moto Q back in May of 2006. I eyed that baby for a long time. It wasn’t until the close of 2007 that I finally took the plunge and picked it up. It took me another 6 months before I finally got a data plan to really use the thing for more than a glorified calculator. I held onto that thing until February 2009 when I got the Storm. I really loved it! At the time, I could justify the $29.99 a month, as money was a bit more freely flowing with both my wife and I working. With the birth of my Daughter Anya in December, it really made me rethink my Mobile Priorities.
Don’t get me wrong, I still really like the storm! SmartPhones in general are still my go-to Gadget dream scenarios. I can just think of a better thing to spend the money on. I’m sure I will venture into the SmartPhone arena again, but for now, I’m experimenting to see how I do without 24/7 Internets.
Does that mean I’m completely happy NOT connected 24/7? No, but I still get all the stuff I want out of my iPod Touch that is on loan. The question is, when I have to give up the touch…will I get my own?
Feb 16, 2010
It has been fun blackberry...
I had a longer post that I just erased like a n00b. I will rewrite. Just not tonight.
I don't know how else to say it blackbery 9530...it's over. We had a good run, but I can't live this lie anyore. You just aren't Meeting my expectations.
I don't know how else to say it blackbery 9530...it's over. We had a good run, but I can't live this lie anyore. You just aren't Meeting my expectations.
Feb 15, 2010
BBA Challenge Round two update
Well I completed round two of my BBa challenge and it was interesting. I will write up a full post tonight but a quick teaser: delciously dense
Feb 9, 2010
BBA Challenge Round 2: Bagels
For the next round of the BBA Challenge, I plan on making cinnamon-raisin bagels. The next recipe in the book is Artos: Greek celebration bread, but the recipe calls for a bram (starter) and that can take a few weeks. I will make the starter next week, and will hopefully get it going in time for Easter.
The bagels will be fun, as I haven't ever made them before.
Look for more posts this week about ingredients, techniques, and my game plan.
Bread on!
The bagels will be fun, as I haven't ever made them before.
Look for more posts this week about ingredients, techniques, and my game plan.
Bread on!
Feb 7, 2010
BBA Challenge Round 1: Anadama Bread - Baking and Results!
Well, I've finished round one of the BBA Challenge! I think I'm off to a good start, and I think my Milladama bread is a mighty fine substitue.
BBA Challenge Round 1: Anadama Bread - Pre-Baking
Today is baking day! I'm in a holding pattern right now. The Original Recipe Anadama bread is proofing, while the Milladama is in the sponge stage. I worked out the different steps I need to follow to complete one Recipe and discovered from start to finish it is about 5 hours...lots of Proofing time in there. I decided to offset the baking by a few steps. Here's the chart I made:
Subscribe to:
Posts (Atom)